Copier Settings

[Auto Zoom for Combine/Booklet]

Select whether to adjust the image automatically to optimal zoom ratio when you specify [Combine] or [Booklet] and select [Auto] for [Paper].

For details, refer to [Auto Zoom for Combine/Booklet] .

[Booklet Short Cut Mode]

Select whether to automatically set the Booklet function to [ON] when the setting screen for [Booklet] is displayed.

For details, refer to [Booklet Short Cut Mode] .

[Default Copy Settings]

Change the default settings (settings when the power is turned on, or the Reset key is pressed) in the copy mode.

For details, refer to [Default Copy Settings] .

[Default Enlarge Display Settings]

Change the default settings (settings when the power is turned on, or the Reset key is pressed) in the copy mode, in the enlarge display mode.

For details, refer to [Default Enlarge Display Settings] .

[When AMS Direction is Incorrect]

When you have selected [Auto] in [Zoom], select whether to print the original even if the original loading direction is different from the paper direction.

For details, refer to [When AMS Direction is Incorrect] .

[Separate Scan Output Method]

Select the timing that the machine starts printing when scanning an original by specifying [Separate Scan].

For details, refer to [Separate Scan Output Method] .

[Auto Zoom (Platen)]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to [Auto Zoom (Platen)] .

[Auto Zoom (ADF)]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to [Auto Zoom (ADF)] .

[Specify Default Tray when APS Off]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to [Specify Default Tray when APS Off] .

[Select Tray for Paper Insertion function.]

Select whether to automatically change the selected paper tray when paper is loaded into the Bypass Tray.

For details, refer to [Select Tray for Paper Insertion function.] .

[Select Tray for Insert Sheet]

Configure the default paper tray loaded with paper when the [Cover Sheet], [Insert Sheet], or [Chapters] is set.

For details, refer to [Select Tray for Insert Sheet] .

[Print Jobs During Copy Operation]

You can specify this option when you are allowed by the administrator to change the setting.

For details, refer to [Print Jobs During Copy Operation] .

[Finishing Program]

Select whether to display finishing program keys in the main screen of the copy mode.

For details, refer to [Finishing Program] .

[Card Shot Settings]

Specify the default setting of [Card Shot] in [Application], and register the original size. With [Card Shot], the registered size can be invoked.

For details, refer to [Card Shot Settings] .