Main Messages and Remedies

[Server connection error.]

(1) The network cable is not connected correctly.

(2) Under [Administrator Settings], [Network Settings] are not set correctly.

(1) Make sure that the network cable is correctly connected.

(2) Under [Administrator Settings], check that [Network Settings] are set correctly.

[Cannot select address for TX. Exceeded the maximum number of addresses allowed for broadcasting]

The number of destinations specified exceeds the number possible for a broadcast transmission.

Reduce the number of broadcast destinations, or send the transmission in multiple batches.

[Document could not be saved in User Box. Insufficient HDD memory. Please check Job History.]

The hard disk is full.

Delete unnecessary data, then try saving the data again.

[The number of registered boxes has reached the maximum limit. No additional boxes can be created.]

The number of User Box that can be registered has reached the maximum number possible.

Delete unnecessary User Boxes then retry registration.

[The number of documents in the box has reached the maximum limit. No additional documents can be stored.]

The number of documents in the box exceeds the maximum number of documents that can be registered in a single box.

Delete unwanted documents then retry registration.

[The maximum number of pages that can be registered in the User Box has been reached.]

The registered document pages have reached the maximum that can be registered in one User Box.

Delete unwanted documents then retry registration.

[The number of programmed jobs has reached the maximum allowance. Please wait until a programmed job has been completed.]

The number of jobs that can be programmed has reached the maximum number possible.

Wait until a job has been completed, or delete a current job.