Returning the machine from the Power Save mode via the wireless network
Configure the setting to return the machine from the ErP Auto Power Off mode via the wireless network when the machine is connected to an Android/iOS terminal.
Tips
To use this function, the optional Wireless LAN Interface Kit is required. The models for North America provide the Wireless LAN Interface Kit as standard.- To use an Android/iOS terminal, you need to install bizhub Remote Access on the terminal.
- This function is not available when the machine is used in the IPv6 environment.
- This function is not available when [Network] - [Network I/F Configuration] is set to [Wireless Only].
- To return the machine from the ErP Auto Power Off mode using an Android/iOS terminal, connect this machine to the Android/iOS terminal once in advance.
Reference- For details on the ErP Auto Power OFF mode, refer to [When using the Power key as a Sub Power Off key] .
- For details on the settings for using this machine in the wireless network environment, refer to [Using this Machine in a Wireless Network Environment] .
In the administrator mode, select [Network] - [Wireless Network Setting] - [Awake from ErP], then configure the following settings.
Settings | Description |
|---|---|
[Awake from ErP] | Select the method to return the machine from the ErP Auto Power Off mode.
[Awake with Magic Packet] is specified by default. |