Specifying the default PS print settings

Configure the PS print settings. Configure the setting for error information printing.

In the administrator mode, select [Print Setting] - [PS Setting], then configure the following settings.

Settings	Description
[PS Error Print]	Specify whether to print error information when an error occurs during PS rasterization. [OFF] is specified by default.
[Brightness]	Adjust the brightness to print data from a computer. For adjustment, the adjustment value specified here is added to that of the brightness specified in the PS driver. [0] is specified by default.
[Contrast]	Adjust the contrast to print data from a computer. For adjustment, the adjustment value specified here is added to that of the contrast specified in the PS driver. [0] is specified by default.

Settings

Description

[PS Error Print]

Specify whether to print error information when an error occurs during PS rasterization.

[OFF] is specified by default.

[Brightness]

Adjust the brightness to print data from a computer.

For adjustment, the adjustment value specified here is added to that of the brightness specified in the PS driver.

[0] is specified by default.

[Contrast]

Adjust the contrast to print data from a computer.

For adjustment, the adjustment value specified here is added to that of the contrast specified in the PS driver.

[0] is specified by default.