Sending a Fax at Preset Time ([Timer TX])

Timer TX

Timer TX is a feature that automatically starts sending at a specified time.

Using the Timer TX function to reserve fax transmission during off-peak rate hours early in the morning and late at night can help to reduce transmission costs. You can reserve up to 20 Fax TX jobs using the Timer TX function.

Tips

  • This function cannot be used together with the following functions.
    Quick Memory TX, Polling TX, Polling TX (Bulletin Board) , broadcast transmission including destinations other than those for faxes

Reference

Operation flow

  1. Load the original.

  2. Tap [Scan/Fax].

  3. Specify the destination.

    supplementary explanationYou can specify multiple destinations at the same time.

  4. Tap [Application] - [Fax Setting] - [Timer TX], then tap [ON].

  5. Using the Keypad, enter the transmission start time, then tap [OK].

    supplementary explanationTo display the Keypad, tap the input area for the numeral.

  6. Press the Start key.

    Scanning of the original starts. The fax is automatically sent at the specified time.

Tips

  • If the machine power is not activated at the start time, fax transmission will not start. The fax transmission starts just after the machine power is turned on.

  • When this machine is in power save mode at the start of communication, it returns from power save mode to start fax transmission.