Basic Operations for Network Fax Transmission

  1. Load the original.

    supplementary explanationWhen loading the original into the ADF, pull out the Document Stopper (1) to prevent the scanned original from falling.

  2. Display the Scan/Fax screen of classic style.

    supplementary explanationFor details on how to display the screen, refer to [Displaying the Scan/Fax Screen] .

  3. Specify the destination.

  4. Specify transmission options as needed.

    supplementary explanationSpecify the size of the target original in [Scan Size] (default: [8-1/2  11] (inch area)/[A4] (centimeter area)). If you fail to set the original size correctly, the image may be cut off.

    supplementary explanationFor details on option settings, refer to [Transmission Option Settings] .

  5. Use the Start key to start transmission.

    supplementary explanationIf necessary, tap [Check Setting] before transmission, and check the specified destination and settings.

    supplementary explanationUsing the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.

Tips
  • IP fax (SIP) is not available on the screen of classic style.

Related setting
Reference