Save Scanned Data on a USB Memory

Permitting saving a file from a USB flash drive (for the administrator)

In [USB flash drive function settings] ( [USB flash drive function settings] ), permit saving a file in a USB flash drive. To prevent data leakage, saving a file in a USB flash drive is prohibited by default.

When user authentication is enabled, select [User Registration] ( [User Registration] ) and permit saving a file in a USB flash drive for each registered user.

Operation flow

  1. Load the original.

    supplementary explanationWhen loading the original into the ADF, pull out the Document Stopper (1) to prevent the scanned original from falling.

  2. Connect the USB flash drive to the USB port of this machine.

    NOTICE

    • When this machine is starting up, do not connect or disconnect the USB flash drive to/from the USB port.

  3. Tap [Save a document to External Memory.].

    supplementary explanationYou can also perform the same operation by tapping [System] - [External Memory] - [Save] in User Box mode.

  4. Specify options to save a file as needed.

    supplementary explanationFor details on option settings, refer to [Storage Option Settings] .

  5. Use the Start key to start saving.

  6. When the operation is complete, remove the USB flash drive from the port of this machine.

    When you use files stored on the USB flash drive on the computer, just connect the USB flash drive to the USB port of the computer.