Loading Paper into the Large Capacity Unit
The paper loading procedure of Large Capacity Unit LU-302 is the same as that of Large Capacity Unit LU-207. The following procedure describes how to load paper into the optional Large Capacity Unit LU-302. The Large Capacity Unit is optional.
1
Open the Upper Door.
NOTICE
- Be careful not to touch the surface of the Paper Feed Rollers with your hand.
2
Lift the Paper Feed Rollers, and load the paper with the required side facing downward.
When printing on letterhead (paper where company names, preset text, and other text or images are already printed), load it with the print side facing up.
For details on the available paper, refer to Paper.
NOTICE
- Do not load an excessive number of sheets such that the top of the stack is higher than the
mark. - Do not load custom sized paper into the Large Capacity Unit. When changing the paper size, contact your service representative.
- If paper is curled, flatten it before loading it.
3
Close the Upper Door.
When you change the paper type, proceed to step 4 to change the setting on this machine.
When you do not change the paper type when adding paper, you can use the current setting without making any changes.
4
If necessary, change the paper setting of the tray on the Paper Setting screen.
The paper type is detected automatically. Intelligent media sensor (option) is required to use this function. For details on Intelligent media sensor, refer to Intelligent media sensor (Option).
To disable the automatic paper type detection, select [Utility] - [Administrator] - [System Settings], and set [Paper type auto detection settings] or [Auto envelope detection sett.] to OFF.
When not using the automatic paper type detection, manually specify the paper type. For details, refer to Changing the paper type.
in the upper-right of a page, it turns into 
and is registered as a bookmark.