* Enter the name of the utility key. You can search descriptions of utility keys.
Peer
To display: [Utility][Administrator Settings][Network Settings][TCP/IP Settings][IPsec Settings][IPsec Settings][Peer]
Register the peer of this machine to use IPsec. Up to 10 peers can be registered.
Select a group, then tap [Edit].
Settings | Description |
|---|---|
[ON]/[OFF] | To register a peer, select [ON]. [OFF] is specified by default. |
[Group Name] | Enter a peer name (using up to 10 characters). |
[Addressing Mode] | Select the method to specify the peer address. Specify the IP address of the peer depending on the selected method. |
[Pre-Shared Key Text] | Enter the Pre-Shared Key text to be shared with a peer using up to 128 ASCII characters or up to 256 hexadecimal characters. Specify the same text as that for the peer. |
[Key-ID String] | Enter the Key-ID to be specified for the Pre-Shared Key (using up to 128 bytes). |
Tips
To check the registered peer settings, select a group name, then tap [Mode Check].