* Enter the name of the utility key. You can search descriptions of utility keys.
IPsec SA Settings
To display: [Utility][Administrator Settings][Network Settings][TCP/IP Settings][IPsec Settings][IPsec Settings][IPsec SA Settings]
Configure SA (Security Association) required for encrypted communication. Up to 10 groups can be registered for the SA.
Select a group, then tap [Edit].
Settings | Description |
|---|---|
[ON]/[OFF] | To register SA, select [ON]. [OFF] is specified by default. |
[Group Name] | Enter the SA name (using up to 10 characters). |
[Encapsulation Mode] | Select an IPsec operation mode. [Transport Mode] is specified by default. |
[Tunnel End Point] | If [Tunnel Mode] is selected in [Encapsulation Mode], enter the IP address of the IPsec gateway that is used as a peer. |
[Security Protocol] | Select a security protocol. |
[Key Exchange Method] | Select the key replacement method to securely create a common key used to encrypt communications. When using a device that does not support the automatic key replacement by IKE, select [Manual Key] to manually configure detailed parameters. [IKEv1] is specified by default. |
[Lifetime After Establishing SA] | Enter the lifetime of a common key used to encrypt communications. [3600] is specified by default. |
Tips
To check the registered SA settings, select a group name, then tap [Mode Check].