Checking the Name and Function of each Part in this Machine

1

Control Panel

Used to configure various settings in this machine.

2

USB Port (Type A) USB2.0/1.1

Used to connect an external memory unit (USB memory unit) to this machine.

3

Right Door

Open this door to clear a paper jam.

4

Main Power Switch

Press this switch to turn the machine on or off.

5

Right Door Release Lever

Used to lock the Right Door.

6

Bypass Tray

Used to print data on irregularly size paper, thick paper, transparencies, postcards (4 6 (A6 Card)), envelopes, or label sheets.

The Bypass Tray can hold up to 100 sheets of plain paper, 20 sheets of Thick 1, 20 sheets of Thick 1+, 20 sheets of Thick 2, 20 sheets of Thick 3, 20 transparencies, 20 postcards (4 6 (A6 Card)), label sheets, or index paper, and 10 envelopes.

7

Tray1, Tray2

Allows you to load up to 500 sheets.

These trays can hold up to 150 sheets respectively of Thick 1, Thick 1+, Thick 2, and Thick 3.

8

Front Door

Open this door to replace the Toner Cartridge, Waste Toner Box, or Drum Unit.

9

Data Indicator

Flashes or lights up to indicate the data receiving status on this machine.

For details, refer to [Data Indicator] .

10

Output Tray

Outputs printed pages.

11

Power key

Press this key to switch to the Power Save mode.

During the normal operation, the key lights up blue. During the power save mode, the key flashes blue or lights up orange.

12

Stylus Pen

Used to select a menu on the Touch Panel, or enter characters.

13

Warning Indicator

Flashes or lights up to indicate that a problem has occurred in this machine.

For details, refer to [Warning Indicator] .

1

Power Cord

Used to supply power to this machine.

2

USB Port (Type B) USB2.0/1.1

Connect to this port when using this machine as a USB-connected printer.

3

Network Connector (10Base-T/100Base-TX/1000Base-T)

Connect to this port when using this machine as a network printer or network scanner.

1

Original Glass

Used to load the original.

2

Fusing Unit Cover Lever

Open this lever when clearing a paper jam in the fusing unit.

3

Fusing Unit

Used to fuse toner to paper using heat and pressure.

4

Transfer Unit

Used to transcribe toner onto paper.

5

Drum Unit

Used to create a print image.

6

Lock Release Tab

Used to remove the Drum Unit.

7

Waste Toner Box

Used to collect used waste toners.

8

Toner Cartridge

Contains toner, with which a print image is created.

9

Slit Scan Glass

Used to scan an original image when using the ADF.

10

Original Scale

Load the original along this scale. This scale is also used to check the size of the loaded original.