[Paper Type]

Select the type of paper that is used to adjust the start position for printing.

[Adjust Value]

Enter the adjustment value between -3.0 mm and 3.0 mm (default: [0.0 mm]).

[Select Tray]

Select a paper tray that is used to adjust the start position for printing.

[Adjust Value]

Enter the adjustment value between -3.0 mm and 3.0 mm (default: [0.0 mm]).

[Paper Type]

Select the type of paper that is used to adjust the start position for printing.

[Adjust Value]

Enter the adjustment value between -3.0 mm and 3.0 mm (default: [0.0 mm]).

[Select Tray]

Select a paper tray that is used to adjust the start position for printing.

[Adjust Value]

Enter the adjustment value between -3.0 mm and 3.0 mm (default: [0.0 mm]).

[600dpi Front]/[600dpi Back]/[1200dpi Front]/[1200dpi Back]

Select the side of paper subject to defect adjustment depending on the resolution.

• [600dpi Front]/[1200dpi Front]: Select this option if defective images exist on the front side of 1-sided or 2-sided printing with the 600 dpi or 1200 dpi resolution.

• [600dpi Back]/[1200dpi Back]: Select this option if defective images exist on the back side of 2-sided printing with the 600 dpi or 1200 dpi resolution.

[Paper Type]

Select the type of paper that is used to adjust defects.

[Adjust Value]

Enter the adjustment value between -8 and 7 (default: [0]).

Increase the value if roughness is detected on a print image, and reduce it if voids or white spots are detected on a print image.

[Paper Size]

Select the size of paper that is used to adjust the staple position.

[Adjust Value]

Enter the adjustment value between -10.0 mm and 10.0 mm (default: [0.0 mm]).

Increase the value when moving the staple position rightward, and reduce it when moving the staple position leftward.

[Paper Size]

Select the size of paper that is used to adjust the fold position.

[Adjust Value]

Enter the adjustment value between -10.0 mm and 10.0 mm (default: [0.0 mm]).

Increase the value when moving the folding position rightward, and reduce it when moving the folding position leftward.

[Paper Size]

Select the size of paper that is used to adjust the fold position.

[Adjust Value]

Enter the adjustment value between -10.0 mm and 10.0 mm (default: [0.0 mm]).

Increase the value when moving the folding position rightward, and reduce it when moving the folding position leftward.

[Paper Size]

Select the size of paper that is used to adjust the fold position.

[Adjust Value]

Enter the adjustment value between -10.0 mm and 10.0 mm (default: [0.0 mm]).

Increase the value when moving the folding position rightward, and reduce it when moving the folding position leftward.

[Paper Size]

Select the size of paper subject to punch hole position adjustment.

[Adjust Value]

Enter the adjustment value between -5.0 mm and 5.0 mm (default: [0.0 mm]).

Increase the value when moving the punching hole upward, and reduce it when moving the punching hole downward.

[Paper Type]

Select the type of paper subject to punch hole position adjustment.

[Adjust Value]

Enter the adjustment value between -10 and 10 (default: [0]).

Increase the value when moving the punching hole rightward, and reduce it when moving the punching hole leftward.

[Paper Type]

Select the type of paper that is used to adjust the inclination.

[Adjust Value]

Enter the adjustment value between -4 and 4 (default: [0]).

Increase the setting value to adjust the paper inclination. When the inclination is not corrected or paper creases after the setting value was increased, reduce the setting value.

[Paper Alignment Plate Pos. (Back)]/[Paper Alignment Plate Pos. (Front)]

Select the paper alignment plate to adjust the position.

[Adjust Value]

Enter the adjustment value between -10.0 mm and 10.0 mm (default: [0.0 mm]).

[Image Stabilization Only]

Select the image stabilization method (default: [Image Stabilization Only]). Use the Start key to execute image stabilization.

• [Image Stabilization Only]: Executes the standard image stabilization process.

• [Initialize + Image Stabilization]: Initializes the log information on image stabilization control and then executes image stabilization. Select this option when [Image Stabilization Only] has failed to work.

[Front]/[Back]/[Thin Paper Front]/[Thin Paper Back]

Select the paper and side on which to adjust the paper separation.

[Adjust Value]

Enter the adjustment value between -10.0 mm and 10.0 mm (default: [0.0 mm]).

Increase the value if paper jams are occurring, and reduce it if the image is transferred unevenly.

[Prior Detection Setting]

When detecting dirt on the Slit Scan Glass in advance, set this option to ON (default: ON).

• [Warning Display]: Select the type of warning messages to be displayed on the screen of this machine (default: [Type1]).
  [Type1]: Shows a warning icon in the icon display area.
  [Type2]: Shows a warning message in the message display area.
  [Type3]: Shows a warning message on the entire screen.

• [Detection level]: Select a contamination detection level (default: [Normal]).
  [Low]: Makes it harder to detect contamination.
  [Normal]: Detects contamination at an ordinary level.
  [High]: Makes it easy to detect contamination.

[Feed Cleaning Settings]

To clean the Slit Scan Glass when scanning an original in the ADF, set this option to ON (default: ON).

[Erase Operation]

Select either the option for erasing the non-image area by the optimal method automatically selected for the background density of the original or the option for erasing by the pre-specified method (default: [Specify]).

[Erase Method]

Select an erase method after selecting [Specify] for [Erase Operation].

• [Bevel]: Copies only the original by erasing the outside area around it.

• [Rectangular]: Copies the original along with the outside around it.

[Original Density]

Adjust the density of the original.

[Switch Local Weight Table]

Select the weight category to suit the distribution paper for each country (default: [Auto]).

[Weight Detection Adjustment]

To adjust a difference between measured values that is caused due to the paper feeding path, enter the adjustment value (default: [0]).

As the value is greater, the weight is detected as a thicker paper type.

[Weight Class Threshold Adjustment]

When limiting to specific paper types to increase the detection accuracy, adjust the threshold of the weight category (default: [0]).

As the value is lower, the threshold shifts to the thinner value, and it becomes easier for the paper to enter the thicker category.

[Weight Class Variation Correction]

For the paper type near the weight category border, when restricting a dispersion that occurs in the judgment results each time paper is loaded, select [Yes] (default: [No]).

[Recycled Paper Identif. Adj.]

For plain paper, adjust the threshold to identify whether the paper is recycled paper (default: [0]).

As the value is greater, it makes easier for the paper to be detected as recycled paper.

[Envelope Identific. Adj.]

For plain paper, adjust the threshold to identify whether the paper is envelope (default: [0]).

As the value is greater, it makes easier for the paper to be detected as envelope.

[Plain Paper Identific.Adj.]

For coated paper, adjust the threshold to identify whether the paper is plain paper (default: [0]).

As the value is greater, it makes easier for the paper to be detected as plain paper.

[Colored Paper Identification Adjustment]

For plain paper, adjust the threshold to identify whether the paper is colored paper (default: [0]).

As the value is greater, it makes easier for the paper to be detected as colored paper.

[Paper Addition Detection Adjustment]

When you want to always detect that paper has been added to the paper tray, select [Yes] (default: [Yes]). At the same time, adjust the setting level that determines ease of detection.