Spread Printing
What Is Spread Printing?
When printing the booklet of the originals for which each page is of a different size, you can decide to perform pagination printing with the larger originals as a spread.
The following is recommended
Use spread printing in circumstances such as these.
- When you want to print originals with a mix of sizes with a booklet-like finish
Target Jobs
Does not depend on the file format.
Target Tools
Touch panel (machine store jobs) | Printer driver | AccurioPro Print Manager | Machine hot folder | AccurioPro Hot Folder |
|---|---|---|---|---|
- | . | . | . | . |
Procedure for Spread Printing
This section describes the procedure to make an A3 original a spread print with a 1-sided original that contain both A4 and A3 originals using the PS Plug-in Driver.
Assumed operating environment - OS: Windows 10, Application: Adobe Acrobat Reader DC.
Install the PS Plug-in Driver on a computer.
Mount Finisher FS-532 with the Saddle Stitcher SD-510 to mounted on the system.
When setting up the printer driver, make sure you check that none of the previous settings are left in any of the item tabs. If any of the previous settings do remain, make sure you clear them.
NOTICE
- The actual screen displayed may differ depending on the application version or revision, and the environment you are using.
1
Open the original in the application, and click [Print] in the [File] menu.
2
Select the printer to use for printing, and click [Properties].
3
Select the [Layout] tab, and configure the following items.
Item | Setting |
|---|---|
[Imposition] | [Booklet] |
[Binding Position] | [Left Bind] |
[Book Spread] | Add check mark |
[Original Size] | [A4] |
[Original Orientation] | [Portrait] |
[Paper Size] | [Default] |
4
Select the [Paper] tab, and click [Acquire Tray and Paper Data].
A "
" is displayed if tray/paper information is successfully obtained.
A "
" is displayed if you were unable to acquire tray/paper information. Check to see if parts such as the optional paper feed tray are mounted properly.
5
In [Paper Tray], select the paper feed tray in which A3 paper (short edge) is set, and click [OK].
6
Configure the following items on the [Print] screen.
Item | Setting Value |
|---|---|
[Copies] | Enter the number of copies |
[Choose paper source by PDF page size] | Add check mark |
7
Click [Print].
in the upper-right of a page, it turns into 
and is registered as a bookmark.