Type | Stapling equipment | |
Function | Non-Sort | Outputs non-offset sets to the primary (main) tray. |
Offset Sort / Offset Group | Offsets each set, and outputs it to the primary (main) tray. | |
Secondary (sub) tray | Outputs non-offset sets to the secondary (sub) tray. | |
Staple | Outputs stapled sets to the primary (main) tray. | |
Punch | Outputs punched paper to the primary (main) tray or secondary (sub) tray. Punch Kit PK-512 needs to be mounted. | |
Post Inserter | Feeds paper from the PI tray. Post Inserter PI-502 needs to be mounted. | |
Staple | Paper size | Standard: A3 , B4 , SRA4 , A4 /, B5 /, A5 , 11 17 , 12 18 , 8.5 14 , 8.5 11 /, 7.25 10.5 /, 5.5 8.5 , Foolscap*, 8K , 16K / Custom: Widthwise 182 mm to 314 mm, Lengthwise 139 mm to 458 mm / Widthwise 7.17" to 12.36", Lengthwise 5.47" to 18.03" Tab paper: A4T , 8.5 11T *: Foolscap refers to 8.5 13 , 8.25 13 , 8.12 13.25 , and 8 13 . |
Paper weight | 60 g/m2 to 209 g/m2 / 15 lb Bond to 56 lb Bond | |
Staple capacity | Max. 50 sheets (Plain, Fine, Color Specific: 64 g/m2 to 80 g/m2 / 17 lb Bond to 21 lb Bond) The maximum number of stapled sheets varies depending on paper types. For details, refer to Paper Capacity Available for Use. | |
Staple position | Front/Rear corner: 1 staple Center: 2 staples | |
Stack capacity for Fold & Staple | 2 sheets to 9 sheets stapled: 100 sets (150 mm to 417 mm / 5.9" to 16.42" in length) / 50 sets (others) 10 sheets to 20 sheets stapled: 50 sets 21 sheets to 30 sheets stapled: 30 sets 31 sheets to 40 sheets stapled: 25 sets 41 sheets to 50 sheets stapled: 20 sets | |
Number of staples | 5,000 staples | |
Dimensions | 424 mm (W) 656 mm (D) 990 mm (H) / 16.69" (W) 25.82" (D) 39" (H) Width including the primary (main) tray (with the edge closed): 674.5 mm / 26.56" Width including the primary (main) tray (with the edge pulled out): 790.5 mm / 31.12" | |
Weight | Approx. 60 kg / 132.28 lb | |
Power source | Supplied from the equipment connected previously to the unit. Supplied from Relay Unit RU-509 when mounted | |
Maximum power consumption | 80 W or less |
For specifications of the optional Post Inserter PI-502 to be mounted on Finisher FS-531, refer to Post Inserter PI-502.