Sending the download URL to your address (Scan to URL)

Scan to URL

If you select the [URL] key displayed on the [Address Book] screen, you can send the URL to download the original data scanned on this machine, to your E-mail address by E-mail. When you log in to this machine that provides user authentication, the [URL] key appears on the [Address Book] screen. The [URL] key has the login user's E-mail address registered. The scanned original data is saved in a User Box on this machine without being attached to an E-mail during the pre-specified period, so data can be acquired regardless of the transmission capacity limit of the E-mail server.

Tips
  • The Hard Disk is optional in some areas. To use this function, the optional Hard Disk is required.

Operations required to use this function (for the administrator)

Register an E-mail address in the user's registration information. Also, check that the Scan to URL function is enabled.

How to configure the setting is explained using Web Connection. For details, refer to [Sending the download URL to your address (Scan to URL)] .

Tips
  • If Active Directory is used as an authentication server, register the user's E-mail address in Active Directory.

Operation flow

  1. Load the original.

  2. Enter user information, and log in to this machine.

    supplementary explanationFor details on how to log in, refer to [Login Screen] .

  3. Tap [Scan/Fax].

  4. Select [URL].

    supplementary explanationWhen [URL] is selected as the sending destination, you cannot specify another destination simultaneously.

  5. Configure Scan option settings as necessary.

  6. Press the Start key.

    supplementary explanationTap [Check Setting] before sending, and check the destination and settings as necessary.

    supplementary explanationTo redo operations for specifying destinations or option settings, press the Reset key.

    Transmission begins.

    supplementary explanationIf you press the Stop key while scanning an original, the scanning process stops, and a list of stopped jobs appears. To cancel scanning of the original, delete inactive jobs from the list.

Related setting (for the administrator)
  • If necessary, you can configure a setting to notify the user of the download URL without attaching files even when you specify a normal E-mail address as the destination to send data. For details, refer to [E-Mail TX (SMTP)] .

  • When the download URL is notified to the normal E-mail address, you can simultaneously specify another destination and send data.