Home>Box>Supported USB memory devices

Box

Supported USB memory devices

USB memory devices that have the following specifications can be connected to this machine.

ItemRequirement
Interface
Compatible with USB Version 1.0/2.0 interface
Format
FAT32 format files
Security
Securities such as data encryption and password lock shall be released, or the security function shall be turned Off.
Memory size
Up to 2 GB is recommended
  • Devices with a memory size of 4 GB or greater may not operate correctly.
  • A USB memory device, which is recognized as multiple drives, cannot be used.
Note the following points when connecting a USB memory device to this machine.
  • Insert USB memory device into USB port near the Touch Panel. Leave the USB port open at a position close to the rear panel. Use it for optional device connection.
  • When you are saving files into or printing files from a USB memory, do not disconnect it from the USB port.
  • Do not use USB devices (such as hard disk unit and a USB switching hub) except for a USB memory.
  • When this machine is operating and when hourglass is displayed on the Touch Panel, do not insert or remove the USB memory device to/from USB port.
  • Do not disconnect the USB memory directly after connecting it.