Home>Fax>Sending a fax with a password (Password TX)

Fax

Sending a fax with a password ([Password TX])

Password TX

The Password TX is a function that sends a fax with a password. It is used to send faxes to a device on which fax peers are restricted by passwords (a device with Closed Network RX enabled).

Tips
  • You can only use this function to communicate with our company's models supporting the closed network reception (password) function.
  • You need to check the recipient's closed network reception password beforehand.
  • This function cannot be used together with the following functions:
  • Relay Distribution, Confidential Communication, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board).
Reference
  • This machine can restrict fax destinations using the Closed Network RX function. For details on the Closed Network RX function, refer to Here.

Operation flow

  1. Load the original.
  2. Tap [Scan/Fax].
  3. Specify the destination.
  4. Tap [Application] - [Fax Setting] - [Password TX], then tap [ON].
  5. Using the Keypad, enter the Closed Network RX password of the destination, then tap [OK].
  6. Press the Start key.

    Transmission begins.