Home>Scan>Machine side: Steps required to use this function (for the administrator)

Scan

Machine side: Steps required to use this function (for the administrator)

Checking a LAN cable for connection

Check that a LAN cable is connected to the LAN port of this ma-chine via the network.

Checking the network settings

Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that an IP address is displayed.

Reference
  • If no IP address is displayed, you need to set up the network. For details, refer to Here.

Checking the environment to use the TWAIN scan function

Check that the appropriate settings are configured to use this machine as a scanner. (You can use this function with the default settings unless otherwise requested.)

How to configure the setting is explained using Web Connection. For details, refer to Here.