Home>Scan>Sending to your address (Scan to Me)

Scan

Sending to your address (Scan to Me)

Scan to Me

By selecting the [Me] key displayed in the [Address Book] screen, you can send E-mails to your E-mail address. If you log in to this machine that provides user authentication, the [Me] key appears in the [Address Book] screen. The [Me] key is assigned to an E-mail address of the login user. To use this function, you do not have to register your E-mail address in the address book.

Operations required to use this function (for the administrator)

Register an E-mail address in the user's registration information.

The registration process is explained using Web Connection. For details, refer to Here.

Tips
  • If Active Directory is used as an authentication server, register the user's E-mail address in Active Directory.

Operation flow

  1. Load the original.
  2. Enter user information, and log in to this machine.
    • For details on the login procedure, refer to Here.
  3. Tap [Scan/Fax].
  4. Select [Me].
  5. Configure Scan option settings as necessary.
  6. Press the Start key.
    • Tap [Check Setting] before sending, and check the destination and settings as necessary.
    • To redo operations for specifying destinations or option settings, press Reset.

    Transmission begins.

    • If you press the Stop key while scanning an original, the scanning process stops, and a list of stopped jobs appears. To cancel scanning of the original, delete inactive jobs from the list.