Home>Print>Directly printing from a USB memory device

Directly printing from a USB memory device

Printing from a USB memory device

By connecting a USB memory device to this machine and specifying a file stored in the USB memory device, you can print the file.

USB memory devices that have the following specifications can be connected to this machine.

Item	Requirement
Interface	Compatible with USB Version 1.0/2.0 interface
Format type	Formatted in FAT32
Security	Encryption, password lock, or other security functions are not provided or such functions can be turned off.
Memory size	Up to 2 GB is recommended. Devices with a memory size of 4 GB or greater may not operate correctly. A USB memory device, which is recognized as multiple drives, cannot be used.

Use the USB connector on the side that is near the Control Panel. Do not use the USB connector near the rear side because it is used for optional devices.
Do not disconnect the USB memory device while saving a file to the device or printing a file saved in the device.
Use only a USB memory device on this machine. Do not use other USB devices (such as hard disk unit and USB switching hub).
Do not connect or disconnect the USB memory when the hourglass is being displayed in the Control Panel while this machine is active.
Do not disconnect the USB memory just after connecting it.

Connect the USB memory device to this machine, and on the Touch Panel, specify the file you want to print.

For details on the printing procedure, refer to Here.