Available operations in the [Finish] tab

In the [Finish] tab, you can configure settings for the finish of printouts.

Settings	Description
[Staple]	Select this check box to staple the printed sheets. In addition, specify the number and positions of staples.
[Center Staple and Fold]	Select this check box to staple the printed sheets in two positions in the center. Use this option when you have set [Print Type] to [Booklet] in the [Layout] tab.
[Punch]	Select this check box to make punch holes (binder holes) in the printed sheets. In addition, specify the number and positions of punch holes.
[Fold]	Select this check box to fold the printed sheets. In addition, select the folding mode.
[Page Fold Setting]	When you have selected [Half-Fold(By Sheet)] or [Tri-Fold(By Sheet)] in [Fold], specify the number of pages to be folded at one time.
[Output Tray]	Select the tray to which the printed sheets are output.
[Paper Arrangement]	Select whether to adjust the binding position on two-sided printed sheets collectively after all data items are received or sequentially each time a data item is received. [Prioritize Arranging Papers]: Paper arrangement is performed once after all data items are received. All pages are adjusted under the same conditions. [Prioritize Productivity]: Paper arrangement is performed sequentially while printing the pages.

To use [Staple], the optional Finisher is required.
To use [Center Staple and Fold], the optional Finisher and Saddle Kit are required.
To use [Punch], the optional Finisher and Punch Kit are required.
The number of punched holes varies depending on the country you are in.
To use Half-Fold or Tri-Fold of [Fold], the optional Finisher and Saddle Kit are required.
To use Z-Fold of [Fold], the optional Finisher and Z-Fold Unit are required.
To use Z-Fold of [Fold], specify the paper size described at the setting you selected from the drop-down list ([Z-Fold (A3, B4, 11 17, 8K)], [Z-Fold (8 1/2 14)] at "Paper Size" of the application software or printer driver.