Specifying the Size or Type of the Paper to Be Copied
Selecting the size and type of paper ([Paper])
Select the paper size and type for copying.
You can also change the size and type settings of the paper loaded in paper trays.
For details, refer to Here.
Copying on paper of a special size ([Custom Size])
Copy on special size paper using the Bypass Tray. Specify the width and length of the paper. You can assign name and register the paper size to the memory once it is specified. You can recall the size in the future.
For details, refer to Here.
Changing the paper setting of the paper tray ([Change Tray Setting])
Change the paper type and paper size of the paper tray.
For details, refer to Here.
Measuring the size of custom paper ([Paper Size])
Measure the size of custom paper using the Original Glass. If you register the measured size in the memory, you can reduce the number of steps required to enter the size from the next time.
Tap [Paper], then select the Bypass Tray.
Tap [Change Tray Setting] - [Paper Size].
Load a single sheet to be measured on the Original Glass.
If a sheet is loaded on the Original Glass, leave the Original Cover open.
Press the Start key.
When measurement is completed, the screen for confirming the measurement result is displayed.
Tap [Store Size].
When not registering the size in the memory, go to Step 8.
In [Registered Paper Sizes], select the key of the memory to register data in.
To change the name of the selected memory key, tap [Edit Name].
Tap [OK].
To set the detected size to the paper size, tap [OK].