Select the binding positions for sheet stapling.
Each set of printed sheets is stapled in a corner (top left or top right) before it is output.
Each set of printed sheets is stapled at two positions (in the top, left, or right) before it is output.
Select the binding position and original loading direction. If [Auto] is specified for the binding position, the binding position is determined automatically based on the direction of the loaded original.
When stapling paper at the upper-left corner, you can specify the staple angle (only in ineo+ 658/558/458). If [Auto] is selected in [Set Staple Position], the staple angle is automatically determined depending on the paper size.
To use the Staple function, the optional Finisher is required.