HomeWeb Management ToolRegistering a WebDAV program

Registering a WebDAV program

A program can be registered or edited using Web Connection. Although character input is a difficult process using the Touch Panel, it can be carried out easily if you use the computer.

A combination of address information and the fax/scan transmission option settings can be registered in a program.

The following describes the WebDAV program.

In the administrator mode, click [Store Address] - [Program] - [Registration]. Select [Search from Function] - [WebDAV], then configure the following settings.

Settings	Description
[Name]	Enter the name of the program (using up to 24 characters). Assign a name that helps you easily identify the program.
[Destination Information]	Click [Search from List], and select a destination WebDAV from the list. Click [Check Destination] to check registered address books. If you wish to manually enter a destination WebDAV, select [Direct Input] and enter the WebDAV. [Host Address]: Select the [Please check to enter host name.] check box, and enter the host name or IP address of a destination WebDAV server (using up to 253 characters). [File Path]: Enter the name of a destination folder in the WebDAV server specified in [Host Address] (using up to 142 bytes). [User ID]: Enter the name of a user who is authorized to access the folder specified in [File Path] (using up to 64 characters). [Password]: Enter the password of the user you entered into [User ID] (using up to 64 characters, excluding "). [SSL Settings]: When SSL is used in your environment, select [ON]. [Proxy]: When a proxy server is used in your environment, select [ON]. [Port No.]: If necessary, change the port number. In normal circumstances, you can use the original port number. Only one destination can be specified.
[Basic Setting]/[Application Setting]	Configure the Scan option settings. For details, refer to Here.
[Limiting Access to Destinations]	Limit access to this destination, if necessary. For details, refer to Here.