HomeBoxSave Scanned Data on a USB Memory

Save Scanned Data on a USB Memory

Preparation required to use this function (for the administrator)

Enable to save files on a USB memory.

A file storage on a USB memory is disabled by default in order to prevent a data theft.

For system settings for USB memory operation, refer to Here.

  • If user authentication has been implemented, you can set permissions for every registration user and public users to store files on a USB memory (Default: [Restrict]). For details, refer to Here.

  • If you are logging in as a User Box administrator with user authentication implemented, you cannot save the scanned original data on a USB memory device.

Operation flow

  1. Load the original.

  2. Insert a USB memory device into the USB port of the machine.

    • When this machine is starting up, do not insert or remove the USB memory device to/from the USB port.

  3. Tap [Save a document to External Memory.].

    • You can also save files by selecting the User Box operation mode and by tapping [System] - [External Memory] - [Save].

  4. Set file save options if necessary.

    • For detailed optional settings, refer to Here.

  5. Press the Start key.

    The file is saved.

  6. When the operation is complete, remove the USB memory device from the port of this machine.

    When you use files stored on the USB memory on the PC, just insert the USB memory device into a USB port of the PC.