HomeFaxRegistering a File for Polling on the Bulletin Board (Polling TX)

Registering a File for Polling on the Bulletin Board ([Polling TX])

Polling TX (Bulletin Board)

The Polling TX function stores a file beforehand on the Bulletin Board User Box on this machine and sends it out upon a request for reception (polling request) from the recipient.

The file registered on the Bulletin Board User Box is sent out upon reception of a polling request.

Only one file can be stored in each Bulletin Board User Box. You can create up to 10 Bulletin Board User Boxes, allowing you to use them for different purposes.

  • The file for polling that is registered with the bulletin board will not be deleted from the box after they have been transmitted upon reception of a polling request from a receiving machine. They are stored according to the file storage period specified for the appropriate Bulletin User Box.

  • This function cannot be used together with the following functions:
    Timer TX, Relay Distribution, Confidential Communication, ECM OFF, V.34 OFF, Quick Memory TX, Overseas TX, Password TX, Polling TX, Polling RX, Polling RX (Bulletin Board).

  • Polling RX can be used to receive a file saved in a Bulletin User Box in a receiving machine by sending a request from this machine. For details, refer to Here.

Operations required to use Polling TX (Bulletin)

Register the Bulletin Board User Box for the registering file for polling.

For details on the registration procedure, refer to Here.

Operation flow

  1. Load the original.

  2. Tap [Scan/Fax].

  3. Tap [Application] - [Fax Setting] - [Polling TX], then tap [ON].

  4. Tap [Bulletin], enter the number of the Bulletin User Box in which to register a file using the Keypad, then tap [OK].

    • To display the Keypad, tap the input area for the numeral.

  5. Press the Start key.

    The file is registered with the Polling TX User Box.