HomeScanOperations Required to Use This Function

Operations Required to Use This Function

Checking a LAN cable for connection

Check that a LAN cable is connected to the LAN port of this machine via the network.

Checking the network settings

Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that an IP address is displayed.

  • If no IP address is displayed, you need to set up the network. For details, refer to Here.

Configuring the environment to send data via a scan server

Enable the Distributed Scan function.

How to configure the setting is explained using Web Connection. For details, refer to Here.