Install a scanner driver required for WS scan transmission in a computer. Then, configure operations to be performed after scan transmission, in the scanner driver. This example shows a procedure for Windows 7.
Before installation, from the Start menu, select [Control Panel] - [Network and Internet] - [Network and Sharing Center] - [Change advanced sharing settings], and check that [Network discovery] is enabled.
From the Start menu, click [Computer] - [Network].
This displays the devices connected to the network.
Right-click the scanner icon of this machine, and select [Install].
Depending on the settings on the computer, the UAC (User Account Control) dialog box may appear. Check the details, and continue.
If both of the scan and printer functions of the Web service are enabled on this machine, the machine is represented by the printer icon.
In Windows 8.1/10/Server 2012/Server 2012 R2/Server 2016, click [Network] - [Add devices and printers] on the toolbar. On the displayed window, select the device name of this machine, then click [Next].
The driver is installed automatically. When the confirmation dialog box appears, click [Close].
From the Start menu, click [Devices and Printers].
Right-click the icon of this machine, then click [Scan properties].
Click the [Events] tab, and specify the operation (how to save original data) of a destination computer at scan transmission (WS Scan).
[Select an event]
Select the operation of a destination computer when performing a scan transmission on this machine.
On the Control Panel of this machine, tap [Direct Input] - [DPWS] in the scan/fax mode, and check that a target computer is displayed.
The settings on the computer are then completed.