Checking the List of Optional Components (ineo+ 364e/284e/224e)

1

Main unit

Scans the original in the scanner section, and prints a scanned image in the printer section.

This unit is referred to as "machine", "main unit", or "364e/284e/224e" in the manual.

2

Original Cover OC-511

Used to fix the loaded originals.

This is referred to as Original Cover in the manual.

3

Reverse Automatic Document Feeder DF-624

Automatically feeds and scans originals by page. This unit also reverses and automatically scans 2-sided originals.

This unit is referred to as ADF in the manual.

4

Dual Scan Document Feeder DF-701

Automatically feeds and scans originals by page. This unit scans a 2-sided original by only requiring the paper be fed into the machine once without reversing.

This unit is referred to as ADF in the manual.

5

Fax Kit FK-511

Used to operate this machine as a fax machine. Alternatively, this kit allows more telephone lines to be connected.

6

Authentication Unit AU-102

Performs user authentication by scanning vein patterns in the finger.

The Working Table WT-506 is required to install Authentication Unit AU-102.

This unit is referred to as an Authentication Unit in the manual.

7

Authentication Unit AU-201

Performs user authentication by scanning information recorded on the IC card.

The Mount Kit MK-735 is required to install Authentication Unit AU-201.

This unit can also be installed on the Working Table WT-506.

This unit is referred to as an Authentication Unit in the manual.

8

Working Table WT-506

Provides an area to temporarily place an original or other materials. This is also used when the Authentication Unit is installed.

9

Keypad KP-101

It is equipped on the side of the Control Panel.

Allows you to enter numbers by using the Hardware Keypad.

10

Keyboard Holder KH-102

Install this holder to use a external keyboard.

For details on external keyboards, contact your service representative.

11

Security Kit SC-508

Supports the copy guard and password copy functions to prevent unauthorized copying.

12

Fax Mount Kit MK-728

This unit is required to install FAX Kit FK-508.

This option can be used in North Amerca.

13

FAX Kit FK-508

Used to add telephone lines.

Fax Mount Kit MK-728 is required to install FAX Kit FK-508.

This option can be used in North Amerca.

14

Mount Kit MK-730

Used to print data on banner paper.

15

Image Controller IC-414

This unit can be installed in ineo+ 364e or ineo+ 284e. Installing this unit will provide higher quality printing result.

Video Interface Kit VI-506 is required to install Image Controller IC-414. Also, Desk DK-510, Paper Feed Cabinet PC-410, Paper Feed Cabinet PC-110, or Paper Feed Cabinet PC-210 must be installed onto this machine.

16

Desk DK-705

Used to install this machine on the floor.

This unit is referred to as Desk in the manual.

17

Desk DK-510

Used to install this machine on the floor.

This unit is referred to as Desk in the manual.

18

Paper Feed Cabinet PC-410

Allows you to load up to 2500 sheets of 8-1/2 11 (A4) size.

This unit is referred to as LCT (built-in) in the manual.

19

Paper Feed Cabinet PC-210

Allows you to load up to 500 sheets respectively in the top and bottom trays.

This unit is referred to as Double Paper Feed Cabinet in the manual.

20

Paper Feed Cabinet PC-110

Allows you to load up to 500 sheets in the top tray and use the bottom tray as a storage box.

This unit is referred to as Single Paper Feed Cabinet in the manual.

21

Finisher FS-534

Sorts, groups and staples printed paper before outputting it.

To install Finisher FS-534, Desk DK-510, Paper Feed Cabinet PC-410, Paper Feed Cabinet PC-110, or Paper Feed Cabinet PC-210 must be installed onto this machine.

22

Saddle Stitcher SD-511

Install this unit onto Finisher FS-534. This unit supports the fold/bind function.

It is referred to as Saddle Stitcher in the manual.

23

Punch Kit PK-520

Install this unit onto Finisher FS-534.

This unit supports the punching function.

24

Finisher FS-533

Install this unit onto the output tray of this machine.

Sorts, groups and staples printed paper before outputting it.

25

Punch Kit PK-519

Install this unit onto Finisher FS-533.

This unit supports the punching function.

26

Job Separator JS-506

Install this unit onto the output tray of this machine.

This unit sorts printed sheets.

This unit is referred to as Job Separator in the manual.

The following options are built into this machine and are not shown in the figure above.

27

Stamp Unit SP-501

Stamps a scanned original when sending a fax. This unit allows you to check that the original has been scanned.

28

Spare TX Marker Stamp 2

A replacement stamp for the Stamp Unit SP-501.

29

Local Interface Kit EK-606

Install this unit when using the voice guidance function.

This unit is equipped with a speaker.

30

Local Interface Kit EK-607

Install this unit when using the voice guidance function and the linkage function with a Bluetooth-compatible device.

This unit is equipped with a speaker and a receiving device for Bluetooth communication.

31

Video Interface Kit VI-506

This unit is required to install Image Controller IC-414 onto ineo+ 364e or ineo+ 284e.

32

i-Option LK-101 v3

Supports the web browser function that is one of the advanced functions.

33

i-Option LK-102 v3

Supports the PDF processing function that is one of the advanced functions.

34

i-Option LK-104 v3

Supports the voice guidance function that is one of the advanced functions.

35

i-Option LK-105 v3

Supports the searchable PDF function that is one of the advanced functions.

36

i-Option LK-106

Used to add a bar code font that is one of special fonts.

37

i-Option LK-107

Used to add a unicode font that is one of special fonts.

38

i-Option LK-108

Used to add an OCR font that is one of special fonts.

39

i-Option LK-110

Used to add an advanced function that converts a file into the DOCX or XLSX type or generates highly-functional and high-quality data.

i-Option LK-110 includes the function licenses for i-Option LK-102 v3 and i-Option LK-105 v3. If you purchase i-Option LK-110, you do not need to purchase i-Option LK-102 v3 or i-Option LK-105 v3.

For details on the addable functions, refer to Here.

40

i-Option LK-111

Supports the ThinPrint function that is one of the advanced functions.

41

i-Option LK-115

Allows you to manage confidential information on this machine using TPM (Trusted Platform Module) that is one of the advanced functions.

42

Upgrade Kit UK-204

• Install this unit when using i-Option LK-101 v3, LK-102 v3, LK-104 v3, LK-105 v3, LK-106, LK-107, LK-108, or LK-110.

• Install this unit when using My Address in association with My Panel Manager.

• Install this unit when using the Overlay or Registered Overlay function.

43

Upgrade Kit UK-208

Allows you to use this machine in a wireless network environment.

44

Upgrade Kit UK-209

Used to connect an Android/iOS tablet terminal to this machine and display the Control Panel on the Android/iOS tablet terminal, enabling remote-control operations.

• This unit is required when using Reverse Automatic Document Feeder DF-624.

• If you are using Dual Scan Document Feeder DF-701, Upgrade Kit UK-209 (dual scan board) is already installed on this machine.

• To use an Android/iOS tablet terminal, settings must be made on this machine by a service engineer. For details, contact your service representative.

• To use an Android/iOS tablet terminal, a dedicated application must be installed on the terminal.

The following options are not shown in the figure.

45

Heater HT-509

Prevents paper in a paper tray from being affected by humidity.

To install Heater HT-509, Desk DK-510, Paper Feed Cabinet PC-410, Paper Feed Cabinet PC-110, or Paper Feed Cabinet PC-210 must be installed onto this machine.

46

Power Supply BOX MK-734

Turns on/off dehumidifier heater operations.

47

Mount Kit MK-735

Required to have Authentication Unit AU-201 built in to the main unit.