FAQ
- Print
- Q1. If using Image Controller IC-603, is it possible to save document data from the computer tothe hard disk (HDD)?
- Q2. Once print settings are configured, do they need to be re-configured before being usedagain?
- Q3. Can I share Favorite Setting?
- Q4. How many documents can be saved on the HDD?
- Q5. Is there a way to print documents larger than A3-size without shrinking them?
- Q6. I cannot properly retrieve information of the optional devices, although I specify thecorrect IP address and then click Acquire Device Information on the PS Plug-in driver.
- Q7. I want to use the fold function using the PS Plug-in driver, but the function is notdisplayed.
- Q8. Can I adjust the gutter width in a book spread for a booklet?
- Q9. The same materials are printed two days in a row, but the colors are not the same.
- Q10. Can I set the back side of the first page (front cover) of a booklet to a blank page?
- Q11. Perfect binding is not achieved by the perfect binder.
- Application
- Q1. The colors are not correct.
- Q2. Using Job Centro, is it possible to edit a job saved on the HDD (HDD job) and print it?
- Q3. I cannot edit the selected job or page using Job Centro.
- Q4. I edited a job on the touch panel and then edited it again using Job Centro. The job'ssettings reverted to the settings as they were at the time the job was saved.
- Q5. I cannot print a job that I edited using Job Centro.
- Q6. Is there a way to print documents larger than A3-size without shrinking them?
- Q7. I cannot print MS-Office files using Hot Folder. What should I do?
- Q8. The correct IP address is entered, but I cannot view the content of the WebConnection.
- Q9. Now operating remotely is displayed on the screen and the machine cannot be operated.
- Q10. How do I access Web Utilities?
- Q11. Can I operate the main body's touch panel screen remotely from a computer?
- Q12. I measured a chart by using a colorimeter, but the color values are not accurate.
- Q13. If I changed a color by using the Alternative Color Management function, would it affectthe overall color of the picture?
- Q14. What is a profile?
- Q15. What is an RGB profile?
- Q16. What is a CMYK profile?
- Q17. What is an output profile?
- Q18. What is a device link profile?
- Q19. How can I switch Exact Color to G7 Calibration?
- Q20. Which colorimeters are available for Color Centro?
- Scan
- Q1. Is the favorite setting available in the scan function?
- Q2. What is the difference between Package and Divided?
- Q3. The registered destinations are not displayed in ascending order.
- Q4. Scan data is not successfully sent to the destination.
- Q5. File Name cannot be selected from the left side of the SCAN screen.
- Q6. What is a print queue?
- Q7. Is the enlarged scanning available?
- Settings and Adjustments
- Q1. Can I change the screen displayed first when the machine is turned on?
- Q2. Can I make a Hold Job be automatically deleted after a certain amount of time haselapsed?
- Q3. Can I change the placement of the function keys (Paper Setting, Both Sides, Adjustment,etc.) at the bottom of the MACHINE screen?
- Q4. I cannot register the settings adjusted using Both Sides Adjust function in a paperprofile.
- Q5. Staples are not diagonal when using corner stapling.
- Q6. I cannot delete an HDD saved job or a secure job because I have forgotten the relevantpassword.
- Q7. I cannot set the weekly timer.
- Q8. No information sound is released when the machine stops due to being out of paper.
- Q9. Can I output one of some pages, for example, the fifth page of 10 pages, on differentpaper?
- Q10. How can I change the paper settings (paper profile) registered in the paper tray?
- Q11. Where should I adjust the folding position to manually fold paper using the post inserterof Folding Unit FD-503.
- Q12. Both this main body and the Relay Unit RU-509 (when connected) have a gamma correctionfunction. What is the difference?
- Q13. Paper jam occurs due to overlapped sheets fed from the paper tray.
- Machine Information
- Q1. Can I replace papers in a tray not in use while printing or copying?
- Q2. Paper jam occurs during printing on thin paper.
- Q3. Staple position deviates by 90 degrees.
- Q4. I forgot the HDD lock password and cannot use the HDD functions.
- Q5. When I select Job Edit - Page Edit from JOB LIST to insert blank paper, is it added to thecounter?
- Q6. Paper jam occurs when continuously printing on coated papers in the Main Body Tray.
- Others
- Q1. Can the main body's touch panel screen be operated using a mouse?
- Q2. Can I change the printing conditions of a job after it has already started printing?
- Q3. Do I need to stop the job if I were to replace the toner bottle while a job is beingprinted?
- Q4. Can I use an external keyboard for password entry or any other entry of information?
- Q5. The heater of Perfect Binder PB-503 does not turn on when the machine's Sub PowerSwitch is turned on.
Q11. Perfect binding is not achieved by the perfect binder.
A11. Is the number of pages in the book sufficient for perfect binding?
Perfect binding is only available when there are more than 10 pages in the body of the book (20 pages for 2-sided printing).