Executing Color Validation: Printer Driver

You can specify a setting to perform Color Validation just before you print a job.

Use a printer driver, Job Centro, or Hot Folder.

This section describes settings on a printer driver.

1. In [Print Mode] of the [Workflow] tab, select [Wait].

2. Click the [Quality] tab.

   • For details, refer to Quality Optimization.

   

3. Select [Color Validation].

4. Click [OK].

   Color Validation is performed, and then the result is printed.

5. Check the result, and then press Start on the control panel.

   The job is printed.