Home
Settings and AdjustmentsAdjustmentsFinisher Adjustment (with Saddle Stitcher SD-513)Saddle Stitcher AdjustmentCrease Position Adjustment: Adjusting the Crease Positions
Settings and AdjustmentsAdjustmentsFinisher Adjustment (with Saddle Stitcher SD-513)Saddle Stitcher AdjustmentCrease Position Adjustment: Adjusting the Crease PositionsSettings and Adjustments
- Adjustments
- Function Overview
- List of Adjustment Menu Items
- Quality Adj.
- Package Color Auto Adj.
- Package Color Manual Adj.
- Density Balance Auto Adj.: Scanning the density balance chart to automatically adjust thedensity balance
- Maximum Density Adjustment: Adjusting the Maximum Density for Y, M, C, and K
- Max. Density Auto Adj.: Automatically Adjusting the Maximum Density for Y, M, C, and K
- Color Density Control
- Periodical Adjustment (Automatic Adjustment): Setting Color Density ControlAutomatically
- Manual Adjustment: Manually Performing Color Density Control
- Adj. of Color Sensor for Each Paper Type: Registering the Sensor Adjustment Data Thatis Adjusted to Paper Type (Color Sensor Adjustment Data for Each Paper Type)
- Checking Color Density Control Error
- Periodical Both Sides Adj.
- Machine Adjustment
- Printer Adjustment
- Restart Timing Adjustment: Adjusting the Image Position of Lead Edge in Paper FeedDirection in the Printer
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction in thePrinter
- FD-Mag. Adjustment: Adjusting the Magnification in Paper Feed Direction in thePrinter
- CD-Mag. Adjustment: Adjusting the Magnification in Crosswise Direction in thePrinter
- Scan Adjustment
- Restart Timing Adjustment: Adjusting the Position to Start Scanning Originals
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction WhenScanning Originals
- FD-Mag. Adjustment: Adjusting FD-Mag. When Scanning Originals
- CD-Mag. Adjustment: Adjusting the CD-Magnification When Scanning Originals
- Printer Adjustment
- Stabilization Adj. Setting: Selecting Priority of Output Speed and Image Quality
- Execute Adjust Operation: Adjusting in Adjustment Mode
- Finisher Adjustment (with Finisher FS-532)
- Staple Finisher (Main) Adjustment
- Exit Guide Paper Width Adj.: Adjusting the Width of Exit Guides of the Finisher
- Upper Gripper Operation: Selecting Upper Gripper Operation
- Output Alignment Operation: Selecting Output Alignment Operation
- Staple Paper Width Adj.: Adjusting the Staple Paper Width
- FD Alignment Plate Adj.: Adjusting the Insertion of the Alignment Unit of StapleStacker
- Staple Position Adjustment: Adjusting the Staple Positions
- Rewind Paddle Descent Adj.: Adjusting the Rewind Paddle Descent
- Rewind Function Operation: Selecting the Rewind Function Operation
- Staple Finisher (Fold) Adjustment
- Fold&Staple Paper Width Adj.: Adjusting the Width of the Adjustment Plates in theSaddle Stitcher
- Fold&Staple Pitch Adj.: Adjusting the Staple Pitch on Fold & Staple
- Fold&Staple Fold Position: Adjusting the Folded Position in Fold & StapleMode
- Fold&Staple Staple Position: Adjusting the Staple Positions on Fold &Staple
- Half-Fold Fold Position Adj.: Adjusting the Half-Fold Position
- Tri-Fold Position Adjustment: Adjusting the Folded Positions in Multi Tri-Fold Mode
- Double Fold Plate Adjustment: Adjusting Double Fold Plate Insertion
- Half-Fold Strength Adj.: Making Roller Pressure Time Longer
- Staple Finisher (Punch) Adjustment
- Staple Finisher (PI) Adjustment
- Staple Finisher (Main) Adjustment
- Finisher Adjustment (with Output Tray OT-510)
- Finisher Adjustment (with Folding Unit FD-503)
- Multi Folder (Punch) Adjustment
- Multi Folder (Fold) Adjustment
- Half-Fold Position Adj.: Adjusting the Half-Folded Position
- Z-Fold Position Adj.: Adjusting the Folded Positions in Z-Fold Mode
- Tri-Fold-in Pos. Adj.: Adjusting the Folded Positions in Tri-Fold-in Mode
- Tri-Fold-out Pos. Adj.: Adjusting the Folded Positions in Tri-Fold-out Mode
- Double Parallel Pos. Adj.: Adjusting the Folded Positions in Double Parallel Mode
- Gate Position Adj.: Adjusting the Folded Positions in Gate Mode
- Finisher Adjustment (with Large Capacity Stacker LS-506)
- Finisher Adjustment (with Saddle Stitcher SD-506)
- Saddle Stitcher Adjustment
- Fold Paper Width Adj.: Adjusting the Misalignment of the Printed Set
- Half-Fold Position Adj.: Adjusting the Half-Folded Position
- Staple Paper Width Adj.: Adjusting the Width of Exit Guides to be Used in StapleMode
- Staple Center Position: Adjusting the Center Position of Staples
- Staple Pitch Adjustment: Adjusting the Staple Pitch
- Trimming Adjustment: Adjusting the Trimming Width
- Tri-Fold Position Adj.: Adjusting the Folded Positions in Tri-Fold Mode
- Trimmer Receiver Adj.: Adjusting the Movement of the Trimmer Receiver
- Saddle Stitcher Adjustment
- Finisher Adjustment (with Saddle Stitcher SD-513)
- Saddle Stitcher Adjustment
- Fold Paper Width Adj.: Adjusting the Misalignment of the Printed Set
- Fold Skew Adjustment: Adjusting the Adjustment Plate Insertion
- Half-Fold Position Adj.: Adjusting the Half-Folded Position
- Tri-Fold Position Adj.: Adjusting the Folded Positions in Tri-Fold Mode
- Crease Position Adjustment: Adjusting the Crease Positions
- Staple Paper Width Adj.: Adjusting the Width of Exit Guides to be Used in StapleMode
- Staple Center Position: Adjusting the Center Position of Staples
- Staple Pitch Adjustment: Adjusting the Staple Pitch
- Staple Offset Adjustment: Adjusting the Staple Positions
- Staple Tip Adjustment: Adjusting the Staple Leg Shape
- Flattening a Fold (Strength): Adjusting the Spine Corner Forming Strength
- Flattening a Fold (Freq.): Adjusting the Roller Reciprocation Count
- Parallel Trimming Adjustment: Adjusting the Levelness between the Trimming Line and CutEdge
- Fore-edge Trimming Adj.: Adjusting the Cut Edge Trimming Width
- 2-Side Slitting Adjustment: Adjusting the 2-Side Slitting
- 2-Side Slit Finishing Adj.: Adjusting the 2-Side Slitting Speed
- Trimmer Receiver Adj.: Adjusting the Movement of the Trimmer Receiver
- Saddle Stitcher Adjustment
- Finisher Adjustment (with Perfect Binder PB-503)
- Perfect Binder Adjustment
- Sub Compile CD Width Adj.: Adjusting the Misalignment of Output Sheets in a Body Set inthe Sub Compile Section
- Clamp CD Width Adjustment: Adjusting the Misalignment in Body Pages
- Clamp FD Position Adj.: Adjusting the Misalignment in Body Pages
- Glue Start Position: Adjusting the Glue Start Position on the Body Set
- Glue Finish Position: Adjusting the Glue Finish Position on the Body Set
- Cover Lead Edge Adj.: Adjusting the Edge of the Left-Hand Cover Sheet
- Cover Trimming Adjustment: Adjusting the Trimming Width of the Right-Hand CoverSheet
- Cover Up/Down CD Width Adj.: Adjusting the Misalignment in Body Pages and CoverPaper
- Spine Corner Forming Pos.: Adjusting the Form of Cover Sheets
- Temperature Adjustment: Setting Temperature on the Sensors inside the Melt Tank and ofthe Glue Apply Roller
- Perfect Binder Adjustment
- Finisher Adjustment (with Finisher FS-531/Finisher FS-612)
- Fold & Staple Stopper: Adjusting the Position of Staples (Only for Finisher FS-612)
- Half-Fold Stopper Adj.: Adjusting the Misalignment of the Edges of Printed Paper (Only forFinisher FS-612)
- Punch Adjustment
- Vertical Position Adj.: Adjusting the Misalignment in the Center Position of thePrinted Paper and the Center between the Punch Holes
- Horizontal Position Adj.: Adjusting the Distance from the Edge of the Printed Paper tothe Center of Punch Holes
- Registration Adjustment: Adjusting the Skew of Punch Holes Position
- Paper Edge Detect Sensor: Adjusting the Sensitivity of the Sensor so as to CorrectlyDetect the Paper Edge That is Used as the Reference for Punch Holes
- Tri-Fold Adjustment: Adjusting the Folded Positions in Tri-Fold Mode
- 2 Pos. Staple Pitch Adj.: Adjusting the Staple Pitch Determined in Fold & Staple andStaple Modes
- Post Inserter Tray Size: Adjusting the Tray Size of Post Inserter
- Output Quantity Limit: Specifying the Limit of Output Quantity
- Finisher Adjustment (with Relay Unit RU-510)
- ADF Adjustment
- ADF Original Stop Pos. Adj.: Adjusting the Position to Start Scanning on the ADF and theImage Position in the Crosswise Direction
- ADF Orig. Stop Pos. Auto: Automatically Adjusting the Position to Start Scanning on the ADFand the Image Position in the Crosswise Direction
- FD-Mag. Adjustment: Adjusting FD-Mag. When scanning on the ADF
- FD-Mag. Auto Adjustment: Automatically Adjusting FD-Mag. When scanning on the ADF
- Home Read Position Adj(Back): Adjusting the Home Position of the Shading Shaft
- FD-Mag. Adjustment(Back): Adjusting the magnification in the paper feed direction on theback side when using the ADF
- FD-Mag. Auto Adj.(Back): Automatically adjusting the magnification in the paper feeddirection on the back side when using the ADF
- Main Scan Dir. Zoom(Back): Adjusting the magnification in the crosswise direction on theback side when using the ADF
- Main ScanDir.Zoom Auto(Back): Automatically adjusting the magnification in the crosswisedirection on the back side when using the ADF
- Original Tray Pre-rise Setting: Adjusting the Original Tray Standby Position on the ADF
- PFU Air Assist Adjustment: Adjusting the Amount of Air Blow
Crease Position Adjustment: Adjusting the Crease Positions
Adjust the crease position in Saddle Stitcher SD-513.