Gamma Automatic Adjustment (Adjustment Flow When Changing the Screen / Regular Adjustment Flow (High Accuracy))
This automatically adjusts the color reproducibility of the whole paper to be output.
• Image quality adjustment flow and the position of this adjustment
In the pre-output image quality adjustment flow, this adjustment is positioned shown below.
Perform the previous adjustment before proceeding with this adjustment.
When Intelligent Quality Optimizer IQ-501 is mounted on the machine, this adjustment is positioned in the same way as the above.
To not continuously perform the series of adjustment of the image quality adjustment flow, perform the gamma automatic adjustment, and then resume from the next adjustment.
- For Image Controller IC-603:
Image quality adjustment flow | Position of this adjustment | |||
Previous adjustment | This adjustment | Next adjustment | ||
Adjustment flow when changing the screen | Without RU | (STEP 1: Screen selection) | STEP 2: This adjustment | (STEP 3: Density balance adjustment) |
With RU | (STEP 1: Screen selection) | STEP 2: This adjustment | (STEP 3: Density balance adjustment) | |
Regular adjustment flow (Standard) | Without RU | - (None) | ||
With RU | ||||
Regular adjustment flow (High accuracy) | Without RU | - (None) | STEP 1: This adjustment | (STEP 2: Maximum density adjustment) |
With RU | - (None) | STEP 2: This adjustment | (STEP 3: Maximum density adjustment) | |
- For Image Controller IC-417 or Image Controller IC-313:
Image quality adjustment flow | Position of this adjustment | |||
Previous adjustment | This adjustment | Next adjustment | ||
Adjustment flow when changing the screen | Without RU | (STEP 1: Screen selection) | STEP 2: This adjustment | - (None) |
With RU | (STEP 1: Screen selection) | STEP 2: This adjustment | (STEP 3: Density balance adjustment) | |
Fine adjustment flow (High accuracy) | Without RU | - (None) | STEP 1: This adjustment | (STEP 2: Maximum density adjustment) |
With RU | - (None) | STEP 2: This adjustment | (STEP 3: Maximum density adjustment) | |
On the touch panel of the main body, press [Adjustment] on the [MACHINE] screen.
The [Adjustment Menu] is displayed.
Press [Execute Adjust Operation] on the [Adjustment Menu] screen.
Press [Gamma Automatic Adj.] and press [OK].
Press [Exit [ADJUSTMENT]].
Wait for the display "Now adjusting" to disappear.