Overview of [Paper Setting]

[Paper Type]

The following seven paper types are provided according to the plainness of paper.

For details about Paper Type, refer to Paper Type Descriptions.

[Plain], [Fine], [Color Specific], [Coated-GL], [Coated-ML], [Coated-GO], [Coated-MO]

[Paper Profile Name]

No entry can be made in setting the paper conditions for the tray to be used. Enter the paper profile name when you register the paper conditions specified for a tray.

Up to 50 one-byte characters (25 two-byte characters) can be entered for the name.

[Paper Size]

Selecting [Standard] automatically detects the standard size of paper loaded in the selected tray.

Selecting [Custom] allows you to enter the desired dimensions from the screen. This setting can also be made by recalling a custom size previously registered.

To specify [Tab Paper], select either A4T or 8.5 11T and specify the number of tabs.

Detectable standard sizes vary depending on the paper tray.

[Custom]:

Widthwise 139.7 mm to 330.2 mm, Lengthwise 182.0 mm to 431.8 mm / Widthwise 5.50" to 13.00", Lengthwise 7.17" to 17.00'' for tray 1

Widthwise 139.7 mm to 330.2 mm, Lengthwise 182.0 mm to 487.7 mm / Widthwise 5.50" to 13.00", Lengthwise 7.17" to 19.20" for tray 2

Widthwise 100.0 mm to 330.2 mm, Lengthwise 182.0 mm to 487.0 mm / Widthwise 3.94" to 13.00", Lengthwise 7.17" to 19.17" for tray 3 (Paper Feeder Unit PF-602m)

Widthwise 100.0 mm to 330.2 mm, Lengthwise 148.0 mm to 487.0 mm / Widthwise 3.94" to 13.00", Lengthwise 5.83" to 19.17" for tray 4 (Paper Feeder Unit PF-602m)

Widthwise 100.0 mm to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.50" to 19.20" for trays 3 to 5 (Paper Feeder Unit PF-707 or Paper Feed Unit PF-707m)

Widthwise 210.0 mm to 330.2 mm, Lengthwise 182.0 mm to 487.7 mm / Widthwise 8.27" to 13.00", Lengthwise 7.17" to 19.20" for tray 3 (Large Capacity Unit LU-202)

Widthwise 210.0 mm to 330.2 mm, Lengthwise 182.0 mm to 487.7 mm / Widthwise 8.27" to 13.00", Lengthwise 7.17" to 19.20" for tray 3 (Large Capacity Unit LU-202XL)

Widthwise 100.0 mm to 330.2 mm, Lengthwise 148.0 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.83" to 19.20" for Multi Bypass Tray MB-506

Widthwise 100.0 mm to 330.2 mm^*1, Lengthwise 487.8 mm to 1200.0 mm / Widthwise 3.94" to 13.00", Lengthwise 19.20" to 47.24" for Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m

Widthwise 182.0 mm to 331.0 mm, Lengthwise 139.0 mm to 483.0 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 19.02" for the post inserter tray of Folding Unit FD-503

Widthwise 182.0 mm to 314.0 mm, Lengthwise 139.0 mm to 297.0 mm / Widthwise 7.17" to 12.36", Lengthwise 5.47" to 11.69" for Finisher FS-531/Finisher FS-612 mounted with Post Inserter PI-502 (upper tray)

Widthwise 182.0 mm to 331.0 mm, Lengthwise 139.0 mm to 297.0 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 11.69" for Finisher FS-532 mounted with Post Inserter PI-502 (upper tray)

Widthwise 182.0 mm to 314.0 mm, Lengthwise 139.0 mm to 458.0 mm / Widthwise 7.17" to 12.36", Lengthwise 5.47" to 18.03" for Finisher FS-531/Finisher FS-612 mounted with Post Inserter PI-502 (lower tray)

Widthwise 182.0 mm to 331.0 mm, Lengthwise 139.0 mm to 488.0 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 19.21" for Finisher FS-532 mounted with Post Inserter PI-502 (lower tray)

Widthwise 139.0 mm to 307.0 mm, Lengthwise 279.0 mm to 472.0 mm / Widthwise 5.24" to 12.09", Lengthwise 10.98" to 18.58" in case of PB tray of Perfect Binder PB-503

Up to 20 custom sizes can be registered and recalled.

[Tab Paper]:

A4T , 8.5 11T (number of tabs: 1 to 15)

[Weight]

Select the paper weight. Four types of coated paper become available when the weight over 81 g/m² / 22 lb Bond is selected.

The unit of weight can be switched. The unit used to register the condition is also used to display that condition on the [MACHINE] screen and the [COPY] screen when called.

The speed can be set to [High] for the paper weight of 176 g/m² / 47 lb Bond or less. The speed can be set to [Low] for the paper weight of 177 g/m² / 48 lb Bond or greater.

Weight Setting:

62-74 g/m² / 16-19 lb Bond

75-80 g/m² / 20-21 lb Bond

81-91 g/m² / 22-24 lb Bond

92-105 g/m² / 25-28 lb Bond

106-135 g/m² / 29-36 lb Bond

136-176 g/m² / 37-47 lb Bond

177-216 g/m² / 48-57 lb Bond

217-256 g/m² / 58-68 lb Bond

257-300 g/m² / 69-81 lb Bond

301-350 g/m² / 82-93 lb Bond

Change Unit:

[g/m2], [Duodecimo-Kg], [Octavo-Kg], [A Book-kg], [B Book-kg],
[lb Bond], [lb Index], [lb Cover], [lb Book], [lb Bristol], [lb Tag]

Speed Setting:

[High], [Middle], [Low], [Auto Change]

Available paper weight varies with each tray.

Main Body Trays (Tray 1 and Tray 2): 62 g/m² to 256 g/m² / 16 lb Bond to 68 lb Bond^*2

Paper Feeder Unit PF-602m (Tray 3): 62 g/m² to 256 g/m² / 16 lb Bond to 68 lb Bond

Paper Feeder Unit PF-602m (Tray 4): 62 g/m² to 300 g/m² / 16 lb Bond to 80 lb Bond

Paper Feeder Unit PF-707 or Paper Feed Unit PF-707m: 62 g/m² to 350 g/m² / 16 lb Bond to 93 lb Bond

Large Capacity Unit LU-202m (Tray 3): 62 g/m² to 300 g/m² / 16 lb Bond to 80 lb Bond

Large Capacity Unit LU-202XL (Tray 3): 62 g/m² to 300 g/m² / 16 lb Bond to 80 lb Bond

Multi Bypass Tray MB-506: 62 g/m² to 300 g/m² / 16 lb Bond to 80 lb Bond

Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m: 128 g/m² to 256 g/m² / 34 lb Bond to 68 lb Bond^*3

Perfect Binder PB-503 PB tray: 81 g/m² to 216 g/m² / 22 lb Bond to 57 lb Bond

When the machine is mounted with Perfect Binder PB-503, the paper weight information for the upper tray/lower tray of post inserter mounted on Folding Unit FD-503 should be set within the range of 81 g/m² to 216 g/m² / 22 lb Bond to 57 lb Bond in order to comply with the specifications for perfect binding covers. When the machine is not mounted with Perfect Binder PB-503, the paper weight is not set in the paper setting. But the paper of 50 g/m² to 300 g/m² / 13 lb Bond to 81 lb Bond can be loaded.

The paper weight information for the upper/lower tray of Post Inserter PI-502 is not set in the paper setting. But the paper of 50 g/m² to 200 g/m² / 13 lb Bond to 53 lb Bond can be loaded.

[Colored Paper]

Specify the color of paper. This setting easily gives the color information of paper loaded in the tray.

[White], [Blue], [Goldenrod], [Gray], [Green], [Ivory], [Orange], [Pink], [Red], [Yellow], [Cream], [Others], [User Color]

[Punch]

Specify whether or not the paper is punched. The paper specified as punched cannot be punched even if [Punch] is selected in [Output Setting].

[Pre-Punched], [No Hole-Punch]

[Both Sides Adj.]

Adjusts [Zoom] ratios ([Vertical], [Horizontal]), [Image Shift] amounts ([Up/Down], [Right/Left]), and [Rotate/Skew] (rotation adjustment or distortion adjustment) for both [Front] and [Back] pages in order to align the images printed on front and back pages in 2-sided printing. Also, [Gap],[Scan Meas.] or [Chart Adjustment] can be used for adjustment. (ineo+ 2060L does not support [Scan Meas.] Adjustment.)

When Intelligent Quality Optimizer IQ-501 is mounted on the machine, [Periodical Adjustment] can be set to ON or OFF in [AutoMeasure]. If
[ON] is selected, Both Sides Adjustment is automatically performed at the specified intervals.

It is advisable to perform Both Sides Adjust for every paper to be used, as the shrinkage ratio differs according to the paper type, paper brand, or difference in temperature of storage location.

It is possible to disable the horizontal zoom setting for the back page in [Common Setting] of the administrator setting.

Vertical Zoom:

Front/Back -1.00 to +1.00 (1 step = 0.01%)

Horizontal Zoom:

Front -1.00 to +1.00 (1 step = 0.01%), Back -0.80 to +0.20 (1 step = 0.01%)

[Image Shift][Up/Down]:

Front/Back -10.0 mm to +10.0 mm (1 step = 0.1 mm)

[Image Shift][Right/Left]:

Front/Back -3.0 mm to +3.0 mm (1 step = 0.1 mm)

Rotate:

Front/Back -1.00 to +1.00 (1 step = 0.01%)

Skew (Distortion adjustment):

Front/Back -1.00 to +1.00 (1 step = 0.01%)

Periodical Adjustment: [ON] or [OFF]

[RU Curl Adj.]

The machine mounted with Relay Unit RU-509 provides [RU Curl Adjustment] displayed on the screen, which allows you to correct the curl of printed paper (arc-like deformation).

Also, switching [ON] and [OFF] for Humidifier Setting is available if Relay Unit RU-509 is equipped with Humidifier HM-102.

[Curl Adjustment]:

[+2], [+1.5], [+1], [+0.5], [0], [-0.5], [-1], [-1.5], [-2], [OFF]

[Humidifier Set.]: [ON], [OFF]

[Air Assist]

Use this function to blow air to paper in order to prevent feeding multiple sheets or paper jam, which is likely to occur depending on the paper type.

When Paper Feeder Unit PF-602m is mounted
[Auto], [ON(Strong)], [ON(Weak)], [OFF]

When Paper Feeder Unit PF-707 or Paper Feed Unit PF-707m is mounted:
[Auto], [Manual]
Followings can be set when selecting Manual:
[Lead Edge Air Level Setting]: [1] ([Weak]) to [9] ([Strong])
[Side Air Level Setting]: [1] ([Weak]) to [9] ([Strong]), [OFF]

When Large Capacity Unit LU-202m is mounted
[Auto], [ON], [OFF]

When Large Capacity Unit LU-202XL is mounted
[Auto], [ON], [OFF]

When Perfect Binder PB-503 is mounted:
[Auto], [ON], [OFF]

[Thickness]

The machine mounted with Image Controller IC-603 provides [Thickness] on the screen, and selecting [Specify] allows the machine to estimate the remaining amount of paper in the tray with greater accuracy.

[Not Specify], [Specify]

Adjustment Range: 0.050 mm to 0.500 mm

[Expert Adj.]

Process Adjustment of transfer/separation/fusing and Upper Fusing Roller Temperature, Lead Edge Erase, Temp. Gap of Fus. Edge and Mid, Lower Fusing Roller Temperature, Rear Edge Erase Quantity, Reverse Output Timing, ADU Reverse Timing, Fusing Speed Adjustment, Registration Loop, Up Fusing Initial Temp., 2nd Transfer Pressure, CPM Down, Toner Amount Save, Density Adjustment Per Tray (YMC), Density Adjustment Per Tray (K), Mis-centering Detect JAM, Double Feed Detection ^*1, Int. Transfer Separation, Thick BK Mode, Feed Correction Level, Output Curl Adjustment, Output Curl (Back on Top), Centering Adjustment (Front), Centering Adjustment (Back), Fusing Air Separation Air Level Setting, Change Fusing Pressure, Hard Paper Mode, PFU Suction Air Level Setting ^*2, Output Paper Separation Setting, and Output Cooling Air Level Adjustment settings are available.

*1: This menu item is displayed when Tray 3 to Tray 5 are selected while Paper Feeder Unit PF-602m, Paper Feeder Unit PF-707, or Paper Feed Unit PF-707m is mounted on this machine.

*2: This menu item is displayed when Tray 3 to Tray 5 are selected while Paper Feeder Unit PF-707 or Paper Feed Unit PF-707m is mounted on this machine.

For details about the [Mis-centering Detect JAM] setting, refer to Print Job JAM Setting: Setting the Detection of Paper Jam Caused by Misalignment.

[Expert Adjustment] is not displayed by default. Contact your service representative.

[2nd Transfer Output Adj. (Front)]: -50 to +50

[2nd Transfer Output Adj. (Back)]: -50 to +50

[2nd Transfer-Lead Edge (Front)]: -50 to +50

[2nd Transfer-Lead Edge (Back)]: -50 to +50

[2nd Transfer-Rear Edge (Front)]: -50 to +50

[2nd Transfer-Rear Edge (Back)]: -50 to +50

[Separation AC(Front)]: -600 to +600

[Separation AC(Back)]: -600 to  +600

[Separation DC(Front)]: -60 to +60

[Separation DC(Back)]: -60 to +60

[Upper Fusing Roller Temperature]: -20 to +20

[Lead Edge Erase Quantity]: 0 to +200

[Temp. Gap of Fus. Edge and Mid.]: -10 to +10

[Lower Fusing Roller Temperature]: -15 to +70

[Rear Edge Erase Quantity]: 0 to +200

[Back on Top Output Timing Adj.]: 0 to +10

[ADU Reverse Timing]: -6 to +6

[Fusing Speed (Front Side)]: -200 to +200

[Fusing Speed (Back Side Offset)]: -200 to +200

[Registration Loop (Front)]: -99 to +99

[Registration Loop (Back)]: -99 to +99

[Up Fusing Initial Temp.]: [Auto], [OFF]

[2ndTrans.Pressure]: [Auto], [Normal], [Low]

[CPM Down]: [Normal], [Down]

[Toner Amount Save]: [ON], [OFF]

[Dens. Adj. Per Tray (YMC)]: [0 (Normal)], [+1], [+2], [+3 (Max)]

[Dens. Adj. Per Tray (K)]: [0 (Normal)], [+1], [+2], [+3 (Max)]

[Mis-centering Detect JAM]: [Detect], [Not Detect]

[Double Feed Detection]: [Detect], [Not Detect]

[Int. Transfer Separation]: [Auto], [ON], [OFF]

[Thick BK Mode]: [ON], [OFF]

[Feed Correction Level]: [0(Normal)], [-1], [-2]

[Output Curl Adjustment]: [Auto], [0], [+1], [+2]

[Output Curl (Back on Top)]: [Auto], [0], [+1], [+2]

[Centering Adj. (Front)]: [ON], [OFF], [Detection Position] (5 to 25 mm)

[Centering Adj. (Back)]: [ON], [OFF], [Detection Position] (5 to 25 mm)

[Fusing Air Separation Air Level Setting]: [Weak] (1) to [Strong] (7), [Auto]

[Change Fusing Pressure]: [Auto], [Normal], [Weak]

[Hard Paper Mode]: [ON], [OFF]

[PFU Suction Air Level Setting]: [Weak] (1) to [Strong] (9), [Auto] (9)

[Output Paper Separation Setting]: [ON(Coated)], [ON(Uncoated)], [Manual], [OFF], [Offset Value] (-50 to +100)

[Output Cooling Air Level Adj.]: [Weak] (0) to [Strong] (8), [Auto] (0)

[Color Density]

The machine mounted with Relay Unit RU-509 provides [Color Density] on the screen. This setting is enabled when [ON] is selected for [Use Color Density Control], which is accessed from the [Adjustment Menu] screen, selecting [Color Density Control] - [Basic Settings].

[Each Paper Type Color Adj.Data]: [Default Adj. Data], [Registered Adj. Data], [OFF]

[Plain], [Fine], [Color Specific]

[62-74 g/m2] / [16-19 lb Bond]

[75-80 g/m2] / [20-21 lb Bond]

[Coated-GL], [Coated-ML], [Coated-GO], [Coated-MO]

[81-91 g/m2] / [22-24 lb Bond]

[92-105 g/m2] / [25-28 lb Bond]

[106-135 g/m2] / [29-36 lb Bond]