Printer P: Measure a Chart

On the measurement screen, select a colorimeter and then start measurement.

• To measure a chart, install the driver of your colorimeter.
  For details, refer to its manual.

• Patterns of charts and available sizes of paper vary among types of colorimeters.

• According to the colorimeter, operations differ. For details, refer to its manual.

1. Select a colorimeter from [Instrument] on the chart measurement screen.

   According to the selection, the chart image appears on the upper-right of the screen.

   • [i1iSis (UV Filer)] returns the measurement result with the UV cut filter.

2. Specify the copy number of the chart outputting to [Copies].

3. Click [Output] to print the chart.

   Before you print the chart, perform calibration.

   For details, refer to Calibration.

4. Click [Start] to start the measurement.

   • An operation screen for the colorimeter appears. Follow the instructions on the windows that follow.

   • The current position of measurement appears on the chart image of the upper-right of the screen.

   • If you measure a wrong line, a warning message appears. You can select either to try again with the correct line or to proceed to the next line.

   • To stop the measurement, click [Stop].

   • After the acquirement of measurement data, [Save the Result] becomes available.

   • The value of each patch appears in the measurement result list.

5. Click [Save the Result] after completing the measurement.

   [Save As] screen appears.

6. Specify the saving place and file name, and click [Save].

   Returns to the Chart Measurement screen after saving the measurement result file.

7. Click [Next].

   The UCR/GCR Setting screen appears.

   • Go to Printer P: Select a Level of UCR and GCR.