Home
ApplicationColor Centro : Application of Image Controller IC-603 for color managementProfile ManagementCreation of a CMYK Target ProfileCMYK TP: Designate Measurement Method
ApplicationColor Centro : Application of Image Controller IC-603 for color managementProfile ManagementCreation of a CMYK Target ProfileCMYK TP: Designate Measurement MethodApplication
- Color Centro : Application of Image Controller IC-603 for color management
- Overview of Color Centro
- Set up Color Centro
- Basic Information of Color Centro
- Color Management with Color Centro
- Calibration
- Calibration Manager Screen
- Operate on the Calibration Manager Screen
- Tone Curve Adjustment
- Tone Curve Adjustment Screen
- Operate on the Tone Curve Adjustment Screen
- Spot Color
- Spot Color Screen
- Operate on the Spot Color Screen.
- Load of a Spot Color Table
- Create a Spot Color Table
- Selection and Addition of a Spot Color
- Add a Spot Color that is Measured by using a Colorimeter
- Adjust a Spot Color Manually
- Adjust a Spot Color by using a Printed Chart
- Save a Spot Color Table
- Change the Priority of a Spot Color Table
- Management of Spot Color Tables
- Management of Spot Colors
- Search for a Spot Color
- Reset the Screen
- Alternative Color Management
- Profile Management
- Profile Management Screen
- Management of RGB Source Profiles
- Management of CMYK Target Profiles
- Creation of a CMYK Target Profile
- Management of Printer Profiles
- Creation of a Printer Profile
- Management of RGB-CMYK Device Link Profiles
- Creation of an RGB-CMYK Device Link Profile
- Editing of an RGB-CMYK Device Link Profile
- Management of CMYK-CMYK Device Link Profiles
- Creation of a CMYK-CMYK Device Link Profile
- CMYK-CMYK DLP (Creation): Start Color Centro Profiler
- CMYK-CMYK DLP (Creation): Select Profiles
- CMYK-CMYK DLP (Creation): Specify Color Conversion
- CMYK-CMYK DLP (Creation): Enter a Profile Name
- CMYK-CMYK DLP (Creation): Confirm the Result of the Calculation
- CMYK-CMYK DLP (Creation): Select a Task
- CMYK-CMYK DLP (Creation): Feed Back Measurement Values
- CMYK-CMYK DLP (Creation): Complete the Procedure
- Editing of a CMYK-CMYK Device Link Profile
- Color Default Settings
- Color Configuration Management
- Profile Set
- Color Configuration
- Color Configuration Management Screen
- Create a Color Configuration
- Edit a Color Configuration
- Register a Color Configuration
- Management of Color Configurations
- Creation of a Profile Set
- Editing of a Profile that Composes a Profile Set
- Improvement of Accuracy of a Profile Set
- Adjustment of Color Conversion of a Profile Set
- Management of Profile Sets
- Specify Environment on Color Centro Profiler
- Other Functions
- Troubleshooting
CMYK TP: Designate Measurement Method
Select [New Measurement] or [Use Existing Measurement File].
When you select [New Measurement], go to Step 4.
When you select [Use Existing Measurement File], go to Step 2.
Click [Browse].
[Open] screen appears.
Select a file, and then click [Open].
Windows: .tmd or .mcd
Macintosh: .tmd
The file name is displayed in [Existing Measurement File].
Click [Next].
When you select [New Measurement], Chart Measurement screen appears. In this case, go to CMYK TP: Measure a Chart.
When you select [Use Existing Measurement File], the UCR/GCR Setting screen appears. In this case, go to CMYK TP: Select a level of UCR and GCR.