Operate on the [Calibration Manager] Screen

Select the calibration method.

• For details, refer to Selection of a Calibration Method.

Specifies a colorimeter.

• For details, refer to Select a Colorimeter.

Check the calibration state.

• For details, refer to Check the Calibration Status.

Set the paper type and screen.

• For details, refer to Specify a Paper Type and a Screen.

Execute calibration.

• For details, refer to Calibrate.

Execute accuracy measurement.

• For details, refer to Measure the Calibration Accuracy.

Execute the advanced calibration (Exact Color or G7 Calibration).

• For details, refer to one of the following:
  Calibrate by Using Exact Color
  Calibrate by Using G7 Calibration

If necessary, reset the Calibration data.

• For details, refer to Reset the Calibration Data.