Adjust a Spot Color Manually
You can adjust the CMYK values of the spot color on [Spot Color] screen. The adjustment result is reflected in the preview in a timely manner. The colors before and after adjustment can be printed for comparison.
To adjust the spot color manually, use [Spot Color] screen.
Select a spot color from the list on the [Spot Color] screen. Specify CMYK values in [Manual Adjustment] - [C], [M], [Y], and [K] to apply to the spot color.
According to the settings, the preview area of [Manual Adjustment] - [After Adjustment] and [After Adjustment] on the list are updated.
For each color, specify the value (from "0" to "100").
If you entered a value with second or later decimal place, the second decimal place is rounded and the value is displayed up to the first decimal place.
Similar operation can be done when you change the value of [C(%)], [M(%)], [Y(%)] and [K(%)] of the list on the [Spot Color] screen.
Confirm the preview of [After Adjustment], and repeat Step 1 as required.
Click [Test Print].
[Confirmation Print] screen appears.
Set the [Copies], [Paper Tray], and [Screen Settings].
In the Screen Setting, select the screen type to be used for printing.
Click [Print].
Test printing is executed.
Confirm the test printing and repeat Step 1 to Step 5 as required.
When you execute fine adjustment, go to Adjust a Spot Color by using a Printed Chart.
When you save the adjusted spot color, go to Save a Spot Color Table.