Finisher FS-612

Type

Multi-folding and multi-stapling equipment

Function

Non-Sort

Outputs non-offset sets to the primary (main) tray.

Offset Sort / Offset Group

Offsets each set, and outputs it to the primary (main) tray.

Secondary (sub) tray

Outputs non-offset sets to the secondary (sub) tray.

Staple

Outputs stapled sets to the primary (main) tray.

Fold & Staple

Outputs saddle-stitched and half-folded sets to the Fold/Staple mode tray.

Half-Fold

Outputs half-folded paper to the fold/staple mode tray.

Tri-Fold

Outputs tri-folded paper to the fold/staple mode tray.

Punch

Outputs punched paper to the primary (main) tray or secondary (sub) tray. Punch Kit PK-512 needs to be mounted.

Post Inserter

Feeds paper from the PI tray. Post Inserter PI-502 needs to be mounted.

Staple mode

3 positions (1 staple at front/rear corner, 2 staples in center)

Available sizes in the primary (main) tray (Staple)

Standard: A3 , B4 , SRA4 , A4 /, B5 /, A5 , 12 18 , 11 17 , 8.5 14 , 8.5 11 /, 5.5 8.5 , 9 11 , Foolscap^*, 8K , 16K /

Custom: Widthwise 182 mm to 314 mm, Lengthwise 139 mm to 458 mm / Widthwise 7.17" to 12.36", Lengthwise 5.47" to 18.03"

Tab paper: A4T , 8.5 11T

*: Foolscap refers to 8.5 13 , 8.25 13 , 8.12 13.25 , and 8 13 .

Available sizes in the primary (main) tray (Fold & Staple)

Standard: A3 , B4 , SRA4 , A4 , 12 18 , 11 17 , 8.5 14 , 8.5 11 , 8K

Custom: Widthwise 210 mm to 314 mm, Lengthwise 279 mm to 458 mm / Widthwise 8.27" to 12.36", Lengthwise 10.98" to 18.03"

Available sizes in the primary (main) tray (Half-Fold, Tri-Fold)

• Half-Fold

Standard: A3 , B4 , SRA4 , A4 , 12 18 , 11 17 , 8.5 14 , 8.5 11 , 8K

Custom: Widthwise 210 mm to 314 mm, Lengthwise 279 mm to 458 mm / Widthwise 8.27" to 12.36", Lengthwise 10.98" to 18.03"

• Tri-Fold: A4 , 8.5 11

Available sizes in the primary (main) tray (straight output, offset output)

Standard: A3 , B4 , SRA4 /, A4 /, B5 /, A5 , 12 18 , 11 17 , 9 11 , 8.5 14 , 8.5 11 /, Foolscap^*, 8K , 16K /

Custom: Widthwise 182 mm to 314 mm, Lengthwise 148 mm to 458 mm / Widthwise 7.17" to 12.36", Lengthwise 5.83" to 18.03"

Tab paper: A4T , 8.5 11T

The following sizes are available only in straight output:

A5 , B6 , 5.5 8.5 /

*1: Foolscap refers to 8.5 13 , 8.25 13 , 8.12 13.25 , and 8 13 .

Available sizes in the secondary (sub) tray

Standard: SRA3 , A3 , B4 , SRA4 /, A4 /, B5 /, A5 /, B6 , A6 , 13 19 , 12 18 , 11 17 , 9 11 , 8.5 14 , 8.5 11 /, 5.5 8.5 /, Foolscap^*, 8K , 16K /

Custom: Widthwise 100 mm to 330 mm, Lengthwise 140 mm to 487 mm / Widthwise 3.94" to 12.99", Lengthwise 5.51" to 19.17"

Tab paper: A4T , 8.5 11T

*1: Foolscap refers to 8.5 13 , 8.25 13 , 8.12 13.25 , and 8 13 .

Available weight in the primary (main) tray

Staple, Fold & Staple, Half-Fold, Tri-Fold: 60 g/m² to 105 g/m² / 15 lb Bond to 28 lb Bond

Straight output, offset output: 60 g/m² to 300 g/m² / 15 lb Bond to 81 lb Bond

Available weight in secondary (sub) tray

50 g/m² to 300 g/m² / 13 lb Bond to 81 lb Bond

Dimensions

424 mm (W) 656 mm (D) 990 mm (H) / 16.69" (W) 25.83" (D) 39"(H) (*: excluding the primary (main) tray)

Width including the primary (main) tray (with the edge closed): 674.5 mm / 26.56"

Width including the primary (main) tray (with the edge pulled out): 790.5 mm / 31.12"

Weight

65 kg / 143.3 lb

Power source

Supplied from the machine . Supplied from Relay Unit RU-509 when mounted

Maximum power consumption

80 W or less