Common Setting: Setting the Various Operations of the Machine

[One Shot Message Indication Time]

Select the time span to display a shot message, such as [Original size is A4], in the message area of the touch panel.

3 seconds, 5 seconds

[Offset by Job Unit]

Specify whether or not to offset the output sheets by job.

ON, OFF

Also specify the number of jobs to be offset when selecting ON for this function (default: 1).

[Continuation Print]

Specify whether or not to output multiple reserve jobs in succession without stopping the machine at a job break.

Copy ON, Copy OFF, Printer ON, Printer OFF

[Stop Button Function]

Specify whether to pause or abort a job when Stop is pressed on the control panel.

Job Temp. Stop, Job Stop

[Back Side Magnification Adjustment]

Specify whether to enable the lens adjustment mode.

ON, OFF

[Fusing Stability]

Select what to prioritize when fusing.

Best Quality, Better Quality, Speed

[Prior Paper Type]

Specify the temperature setting of the fusing section on standby. It can shorten the waiting time before printing by selecting a frequently used paper.

Others, Plain

[Dash Length (Page Stamp)]

Select the length of the dash to be used in a style of [Page] in [Stamp].

Long, Short

[Center Crop Mark Trim Margin]

Specify the space between the center crop mark and image area (center crop mark trim margin).

0.0 to 20.0 mm (default: 1.0)

[Schedule Cross Axis Unit (Default)]

Select the unit of horizontal axis on the [Schedule] screen.

Timetable, Time Frame (m), Sheet Volume

[Hold Job Status after Output (Default)]

Select the default value to delete or save the data of hold job after outputting.

Delete, Save

[Destination for HDD Recall (Default)]

Select the default destination for the job data recalled from the HDD.

Print, Hold, Print&Hold,

[Offset Output Mode]

Specify how to offset the output sets.

Change Out Pos., Partition Paper (Tray 1 to Tray 5, Bypass, PI 1, PI 2), Stop Print

[Needless Tab Paper Exit]

Specify whether or not to automatically discharge the oddments of tabbed sheets loaded in a tray as a set for copy job.

ON, OFF

[Remaining Memory (Measurement Unit)]

Select the unit of displaying the remaining memory.

%, GB

[Remaining Memory (Warning)]

Select the percentage at which to give warning when the remaining memory is low.

5 % or Less, 10% or Less