Home Settings and AdjustmentsNIC Setting: Setting the Machine Network Information

NIC Setting: Setting the Machine Network Information

You can set the machine's network-related information, including the IP address. The [NIC Setting] screen depends on the image controller used.

[NIC Setting] screen for Image Controller IC-602

[Machine NIC Setting] screen for Image Controller IC-415/Image Controller IC-308

  1. Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.

  2. Press [Network Setting] on the [Administrator Setting Menu] screen, and then press [NIC Setting].

    The [NIC Setting] screen is displayed.

    For details about the [NIC Setting] screen for Image Controller IC-602, refer to the Controller NIC Setting Menu: Configuring the Network Information of the Controller.

    For the [NIC Setting] screen for Image Controller IC-415/Image Controller IC-308, go on to step 3.

  3. Make a setting for each item.

    • Use the touch panel keypad or the keypad on the control panel to enter numeric values. Press [Set] to highlight the next area for entry.

    • To specify the mail server by the host name, enter the IP address of either DNS Server 1 or DNS Server 2. When using two DNS servers, enter the respective IP address of each DNS server.

    • To activate this setting change of the DNS server, the main body needs to be rebooted. Press [OK], and turn off then on the sub power switch.

    • Specify the line speed of the network in Line Speed Setting. Choose from the options provided.

  4. Press [OK] to complete the setting.

    • To cancel the change, press [Cancel]. In either case, the screen returns to the [Network Setting Menu] screen.