Curl Adjustment: Adjusting Curl Amount
If the machine is mounted with Finisher FS-531 or Finisher FS-612 without Relay Unit RU-509 mounted, [Curl Adjustment] is displayed on the [Finisher Adjustment Menu] screen accessed from the [Adjustment Menu] screen.
Set the curl adjustment to be performed in the decurling section of the machine for Simplex, Duplex, and Tri-Fold (inside print) modes (Finisher FS-612 only).
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.
Press [Finisher Adjustment] and [Curl Adjustment] in sequence.
Select [+0] to [+2] for each adjustment item classified by output mode.
If Finisher FS-531 is mounted, [Simplex Tri-Fold 62 to 80g/m2 Inside Print] and [Simplex Tri-Fold 81 to 105g/m2 Inside Print] buttons cannot be selected.
If Finisher FS-612 is mounted, the paper weight value displayed on the screen is changed each time [Change Unit] is pressed.
Press [OK] to complete the setting.
To cancel the change, press [Cancel].
In each case, the screen returns to the [Finisher Adjustment Menu] screen.