Selecting an Output Tray
This section describes how to select an output tray.
Position the original.
Press [Output Setting] on the [COPY] screen.
The [Output Setting] screen is displayed.
The front image of the machine shows tray positions available for delivery, including the tray currently selected.
Press the desired tray position button "
."The square key for the selected tray is highlighted on the front image of the machine in the [Output Setting] screen.
Large Capacity Stacker LS-505 or Large Capacity Stacker LS-506 mounted with the machine can display [Pile Set]. In addition, Large Capacity Stacker LS-505 or 2 units of Large Capacity Stacker LS-506 mounted with the machine can display [Stacker Auto]. For details, refer to Allowing Paper from Several Jobs to Pile Up and Switching Stacker Automatically.
Withdraw the delivery tray of the saddle stitcher, if selected as an output tray.
When using the delivery tray of the saddle stitcher, be sure to fully withdraw it. Open the tray stand located under the delivery tray of the saddle stitcher when fully withdrawing it.
Never return the delivery tray to its original position with the tray stand opened.
Press [OK] on the [Output Setting] screen.
The screen returns to the [COPY] screen.
Output trays each have a limit in capacity. Be careful not to exceed the limit, otherwise unexpected trouble may be caused.