Scan Settings

Click [Web Service Setting] - [Scanner Settings] in the [Network] tab to display this screen.

The setting contents are the same as those accessed by selecting [Network Setting] - [NIC Setting] - [Web Service Setting] in Administrator Setting.

This screen allows you to make settings on the scanning function of Web service.

1. Select either [Enable] or [Disable] from the [Scan Function] drop-down list.

2. To make an entry, click the text box to type in.

3. Click [OK]. Clicking [Cancel] cancels the setting.

4. Click [OK] on the setting complete screen.

5. If you have changed any setting with an asterisk (*), turn the machine power off then on.