Printer P: Copy from the Image Controller

You can make a duplication of the printer profile in the image controller, to the image controller.

1. Click [Printer Profile] on [Profile Management] screen.

   • Similar operation can be done by selecting, on the [File] menu, [Profile Type] - [Printer Profile].

2. From the tree view, select [Controller].

   The list appears according to the selection.

   • For details about how to connect another controller, refer to Switch the Image Controller to Connect.

3. From the list, select the printer profile to copy.

   • When you reload the information of the image controller connected currently, select [File] menu - [Reload].

4. Click [Copy].

   Displays the [COPY] screen.

   • When you select the multiple printer profiles, [Copy] is not available.

   • When a folder other than [Controller] is selected on the tree view, [Copy] is not available.

   • Similar operation can be done when you select [File] menu - [Copy].

5. Click [Saved Name].
   Up to 31 one-byte characters can be used.

   • You cannot save the printer profile of the same name with those in the image controller.

6. Select [Paper Type Link].

7. If necessary, enter [Memo].
   Up to 64 alphanumeric characters and symbols can be entered.

8. Click [OK].

   The duplication of the printer profile is generated in the image controller.