Operate on the [Tone Curve Adjustmen] Screen
This section describes basic operation of [Tone Curve Adjustment] screen. The color tone that is displayed on the display may differ slightly from the color tone that is actually output.
Select the sample picture to confirm the conditions where the tone curve is adopted.
For details, refer to Selection of Sample Picture.
Confirm the sample picture displayed at [Before Adjustment] and [After Adjustment].
For details, refer to Confirmation of the Image.
Load the tone curve to make adjustment. Or, create the new tone curve.
For details about how to load the tone curve, refer to Load of Tone Curves.
For details about how to create the tone curve, refer to Create Tone Curves.
If necessary, adjust the brightness and the contrast, or set each color adjustment. Or, click on the curve to add the point and drag the added point to adjust the curve.
For details about how to adjust the brightness and the contrast, refer to Brightness/Contrast Tab.
For details about how to set each color adjustment, refer to Adjustment of Tone Curves (Each Color).
For details about how to operate the point, refer to Adjustment of Each Color.
Save the adjusted tone curve.
For details, refer to Save the Tone Curves.
If necessary, execute some management operations for the tone curve.
For details, refer to Management of Tone Curves.
If necessary, reset the tone curve.
For details, refer to Reset Tone Curves.