Image Position

[Image Shift]

[Off], [Shift Front/Back Evenly], [Shift Front/Back Separately]

Select [Right] and [Bottom] to shift a position of a print image.

Select [Right] to shift the output image horizontally. (Positive value: shift to the right, negative value: shift to the left)

Select [Bottom] to shift the output image perpendicularly. (Positive value: shift to the bottom, negative value: shift to the top)

[Image Position]

[Lead Edge], [Center], [Rear Edge]

Set an image position if the output size is larger than the original size.

[Crop Mark]

[Off], [Corner], [Center], [Corner/Center]

Set this to print a crop mark on paper.

[Setting for Imposition]

[Per Page], [Per Sheet]

Set whether to print a crop mark for imposition per page or per sheet.

[Only on Front Side]

Off, On

The crop mark is printed only on the front surface if [2-Sided] is selected.

[Corner Crop Mark Type]

[Type 1], [Type 2], [Type 3]

Specify a type of a corner crop mark.

[Type 1]:

[Type 2]:

[Type 3]:

[Trim Margin]

0 mm to 20 mm / 0" to 0.79"

A position can be shifted while displaying a preview.

[Horizontal Shift]

-20 mm to 20 mm / -0.79" to 0.79"

A position can be shifted while displaying a preview.

[Vertical Shift]

-20 mm to 20 mm / -0.79" to 0.79"

A position can be shifted while displaying a preview.