HomeDescriptions of Functions / Utility KeysMobile Connection Settings

Mobile Connection Settings

To display:

[Utility]
- [Administrator]
  - [System Settings]
    - [System Connection Setting]
      - [Mobile Connection Settings]

Configure a setting to connect this machine to a mobile terminal.

Setting	Description
[Simple Connection Setting]	Configure functions to associate with a mobile terminal. [QR Code Display Setting]: When displaying wireless connection information of this machine using the QR code, set this option to ON (default: OFF). [Enable NFC]: When using NFC, set this option to ON (default: OFF). [Enable Bluetooth LE]: When using the Bluetooth LE, set this option to ON (default: OFF). To use Bluetooth LE, the installation of the required option and the setting by the service representative are required. For details on the required option, refer to Here.
[Wireless Connection Setting]	Configure a setting to establish a wireless connection from a mobile terminal to this machine. This option is available when [QR Code Display Setting] or [Enable NFC] is used in [Simple Connection Setting]. [Wireless Connection Setting]: When connecting from a mobile terminal to this machine in wireless mode, set this option to ON (default: OFF). [Wireless Connection Method]: Select the method for setting the information required to establish a wireless connection from a mobile terminal to this machine (default: [Use MFP Wireless Setting]). This option is displayed when this machine is connected to a wireless network environment. [Individual Setting]: Specify information required to establish a wireless connection from a mobile terminal to this machine. [SSID]: Enter the SSID of the access point (using up to 32 characters). [Authentication/Encryption Algorithm]: Select the algorithm used for authentication or encryption (default: [No Authentication/Encryption]). Specify [WEP Key Input Method] and [WEP Key] when [WEP] is selected in [Authentication/Encryption Algorithm]. When an algorithm other than [WEP] or [No Authentication/Encryption] is selected in [Authentication/Encryption Algorithm], specify [Passphrase Input Method] and [Passphrase]. When [Network I/F Configuration] is set to [Wireless Only], a pairing is established by applying the wireless settings of this machine; therefore, this setting is not displayed.

Setting

Description

[Simple Connection Setting]

Configure functions to associate with a mobile terminal.

[QR Code Display Setting]: When displaying wireless connection information of this machine using the QR code, set this option to ON (default: OFF).

[Enable NFC]: When using NFC, set this option to ON (default: OFF).

[Enable Bluetooth LE]: When using the Bluetooth LE, set this option to ON (default: OFF). To use Bluetooth LE, the installation of the required option and the setting by the service representative are required. For details on the required option, refer to Here.

[Wireless Connection Setting]

Configure a setting to establish a wireless connection from a mobile terminal to this machine. This option is available when [QR Code Display Setting] or [Enable NFC] is used in [Simple Connection Setting].

[Wireless Connection Setting]: When connecting from a mobile terminal to this machine in wireless mode, set this option to ON (default: OFF).

[Wireless Connection Method]: Select the method for setting the information required to establish a wireless connection from a mobile terminal to this machine (default: [Use MFP Wireless Setting]).
This option is displayed when this machine is connected to a wireless network environment.

[Individual Setting]: Specify information required to establish a wireless connection from a mobile terminal to this machine.
[SSID]: Enter the SSID of the access point (using up to 32 characters).
[Authentication/Encryption Algorithm]: Select the algorithm used for authentication or encryption (default: [No Authentication/Encryption]).
Specify [WEP Key Input Method] and [WEP Key] when [WEP] is selected in [Authentication/Encryption Algorithm].
When an algorithm other than [WEP] or [No Authentication/Encryption] is selected in [Authentication/Encryption Algorithm], specify [Passphrase Input Method] and [Passphrase].

When [Network I/F Configuration] is set to [Wireless Only], a pairing is established by applying the wireless settings of this machine; therefore, this setting is not displayed.