Managing the stamp data

You can register or edit stamp data using Data Managing Utility. Up to eight units of stamp data can be managed. You cannot edit or delete stamp data that was registered on this machine when it was shipped.

• This function is available when the Web browser function is disabled. When the optional Extension Memory is installed, this function is available regardless of whether the Web browser function is enabled or disabled. Some models provide Extension Memory as standard. For details, refer to Here.

1. In the Web Connection login page, start the [Manage Stamp Data].

   The stamp data list registered on this machine appears.

2. To register or edit the stamp data, click [Edit].

   • Clicking [Delete] deletes the registered stamp data. The stamp data will not be deleted until you click [Export to the device] and write it to this machine.

   

3. Register or edit the stamp data, and click [OK].

   • You can edit data while checking the result in the preview.

   

   Settings	Description
   [Stamp Name]	Enter the stamp name (using up to 16 characters).
   [Stamp image file]	Specify the location of the image file (BMP) to be used as a stamp. [Select from PC]: Click [Browse...], then select an image file to be imported from your computer. [Select from SMB List]: Click [SMB List], then select an image file to be imported from the SMB sharing folder.
   [Scan]	Enlarges a stamp image. You can check the image details.
   [Zoom Magnification]	Specify the zoom ratio of the stamp image. The ratio can be adjusted in increments of 1%.

4. Click [Export to the device].

   • Clicking [Undo] returns to the state before the change.

   The registered or edited stamp data is written to this machine.