Before you begin, make sure that:
Your wireless network is set up and working properly.
The wireless network adapter installed in your printer is attached and working properly.
The computer you are using is connected to the same wireless network where you want to set up the printer.
You know the network name (SSID) and the WEP key or WPA/WPA2 preshared key/passphrase of the wireless network you want to connect to.
Do either of the following:
Depending on your operating system, run the Wireless Setup Utility or Wireless Setup Assistant. For more information, see Using the Wireless Setup Utility (Windows only) or Using the Wireless Setup Assistant (Macintosh only).
From the printer control panel, configure the printer for wireless connection. For more information, see the User’s Guide.
Print a network setup page, and then check if the printer is connected to the selected wireless network. For more information on printing a network setup page, see the User’s Guide.